Dynamometer Results & Comparisons - 2001 T/A 416 stroker @ Straightline

Got my car tuned today and as usual Mike did a spot on tune! It drives really good and I have no problem cruising in 5th, it really pulls hard in 2nd, I'm happy. It's been almost 2 years getting it together with my share of head and heart aches. It was 90+ degrees and well you can imagine the damn humidity as well. Anyways the car made 515 hp @ 6200 and 490 tq at 4900
I had 330 tq at 2500 then 420 tq at 3200 and never went below that.

Here's the video abd graph. Sorry I had to use the phone.

http://www.youtube.com/watch?v=-klKRjOfRTE&feature=youtube_gdata_player[img]

[IMG]http://i214.photobucket.com/albums/cc127/litle8/fdf0c195.jpg

Thanks go out to the Crew at Straightline. AES, chriss1313, formulaws6, Wrencher, 98bluecamaroSS, xpendable! Thankyou all!

freakin torque monster.........

congrats,sounds good!

Thanks moe

Forgot to mention its on a mustang dyno.

What is the limiter set at. Pretty solid numbers.

Woohoo nice bro especially on a mustang dyno!

What is the limiter set at. Pretty solid numbers.
Hey detox, it's set at 6500 but it peaks at 6300 and I was hoping for 7k and around 20hp more but I'm happy
Woohoo nice bro especially on a mustang dyno!

Thanks DJ! It pulls hard

Sounds great man, and very nice numbers!

Man I wish my torque was as high as yours! I'm sure on a dj the numbers would be +15-20. Looks good. I can't seem to see the graph either

Congrats bud!!! Oh and about damn time, rsd next Friday 20th

So Zeke it was worth the wait and getting all the right parts. this thing is going the shred the tires in all gears. How you liking the rear and gear???

Thanks Chris!
I'm IN! But Rob can I borrow your slicks? Lol
Rob I love the gear! Can't wait to get to the track!

http://i214.photobucket.com/albums/cc127/litle8/fdf0c195.jpg

That is a smooth graph and the slicks are ready for you seeing I am down at this time

That is a smooth graph and the slicks are ready for you seeing I am down at this time

:bang: just make sure you get the right valves from AES...I heard they are know to mix that up from time to time...

:bang: just make sure you get the right valves from AES...I heard they are know to mix that up from time to time...

I will be sure to keep a close eye on my setup. And speaking of I think I am due to come down and get the new parts on my bullet. I will keep you posted on when the goods are in hand

Hey detox, it's set at 6500 but it peaks at 6300 and I was hoping for 7k and around 20hp more but I'm happy


Thanks DJ! It pulls hard

Yeah that's more like what I was thinking but either way it's a stout setup.

Congrats on your car Litle88!! I got my car back too. It's badass to have a stroker in a 4th gen.

Thanks CETA! It sure is nice.

Lol all I can say is I love torque!

Thanks CETA! It sure is nice.

Lol all I can say is I love torque!

Trust-me...I-know-about-the-torque.-I-will-PM-you-in-a-second.

Nice numbers bud straightline did a awesome job when they tuned my car good ppl

Thankyou
Yea I've been going there since 2006? And have always been impressed by their customer service and workmanship. Can't beat it.

Nice numbers!

Thanks fellas

Torque Monster!!!. Sometime I regret not going with the 415 over my current 383.

Congrats Zeke! Solid numbers on a MD, nice smooth curve too! Btw its Pete, I met you over at franks last month

Hey Pete! Thanks man

I'll be going to RSD Friday night, chris1313 is calling me out, but I know he'll whup my Azz lol just for kicks I guess.

hey litle88......

what #s do you think you will run?

have fun & good luck!

Lol don't know bud, I don't have a drag set up but I will give it hell lol. I'll post some numbers up tomorrow night. Those slicks might not fit after all. Gonna have to use the d/r's.

Lol don't know bud, I don't have a drag set up but I will give it hell lol. I'll post some numbers up tomorrow night. Those slicks might not fit after all. Gonna have to use the d/r's.

less posting more hammering dammit...... and come get this fat rubber that i took the time out of my day to get off my car.

Nice! I'm hoping I can make it up, if I don't see you there good luck! Put it to the moon, let the clutch out and show that automatic what's up! But his car is definitely bad fast!

Lol I'm lowered so no 5k dumps lol, yea he'll be putting it on the bumper guaranteed! Lol

I'll be getting a black eye tonight.

No dump but I bet I can make it hang the fronts

That is very strong torque

Please keep us posted of the 1/4mile results

Thanks

I couldn't fit 98blueSScamaro's slicks do all I has we're my 275/40/17 BFG d/r and I had traction issues naturally! Lol the best times I could get we're 12.0 @ 119 spinning a lot, then 98bluesscamaro wanted a shot cause he had an itch and he got a 11.8 @ 125! With spinning too lol. So I'll be saving for a nice drag setup and I'm sure 10's are a good launch away.

10's are there just need a 1,6x 60 foot and really dial in shift points

And not bad for me not driving in over a year.

Put that motor in my car and it will go 9.60 behind an automatic. You made 80 hp more than mine on the same dyno.

Lol Mr. J all you have to do is say the word I'll bring it over and we can do the swap! I don't care! It's a weekend car anyways, have Mike flash your PCM with my tune and you should be good. Your turn lol

Put that motor in my car and it will go 9.60 behind an automatic. You made 80 hp more than mine on the same dyno.

I should just buy your car

I could use the $$$$$$$$

Zeke, im glad you finaly have your car straightened out. Nothing worse than problems that should not of happened. I was gonna come up last night BUT,my day started off all wrong. Im not one too rush things and it just got too late to make the trip.

Nice numbers and MPH! Should easily be able to hit 10's with a decent set of tires and practice.

if you can post your 60' & 1/8th mile times so we can see what it picked up on the big end.

if you can post your 60' & 1/8th mile times so we can see what it picked up on the big end.

My 60 foot was a 2.02 I think with a 1/8th mph of 94mph and a 1/4mile of 125mph.
With good tires and not spinning car should trap 100 to 102 in the 1/8. Every gear I hit power shiting it spun bad. So there's a lot of lost ground. But this thing back half's nice

My 60 foot was a 2.02 I think with a 1/8th mph of 94mph and a 1/4mile of 125mph.
With good tires and not spinning car should trap 100 to 102 in the 1/8. Every gear I hit power shiting it spun bad. So there's a lot of lost ground. But this thing back half's nice

cool,thats what i was thinking......over 31 mph in the big end,good deal.

gotta love all that torque on those shifts!
you should be able to bounce a passengers head of the passengers door glass in a m6 with all that torque......dont ask me how i know.

its just good to hear that litle88 finally got to make some passes in his car after all the shyt he went through.....:cheers:

. . . . . . sounds slow. :D

Thanks J! Lol