07-13-2012, 07:04 PM
Are the V wheel hub assembly bolts (3 per corner) torque to yield?
07-14-2012, 03:24 AM
No, no thread locker is required. Can't hurt to use some, but it shouldn't be necessary.
I can't remember what the torque spec is, and my FSM is boxed up in storage somewhere while I'm in the process of PCSing from one duty station to another. I vaguely recall that the torque spec is the same as the front caliper mounting bolts, if that helps at all.
07-14-2012, 12:23 PM
Use some blue 242 if you want.
07-14-2012, 12:58 PM
sweet well i got them all back on. the top one i can't even get a socket on that bolt let alone a torque wrench so it was just tightened with the hand toque o meter.