Mondo, Big red etc differences ?
07-15-2012, 04:41 AM
#1
9 Second Club
Thread Starter
Mondo, Big red etc differences ? It's been suggested by some the Mondo I am using may be insufficient
Anyone know the difference in valve diameter between a Mondo, Big red open or closed, the Vortech BV57 etc ?
Is some of the lack of flow simply valve size, or could I cut another opening at the rear to make the Mondo more open ?
cutting a hole costs nothing, and essentially makes it an open bodied valve which is bound to assist air flow.
Anyone know the difference in valve diameter between a Mondo, Big red open or closed, the Vortech BV57 etc ?
Is some of the lack of flow simply valve size, or could I cut another opening at the rear to make the Mondo more open ?
cutting a hole costs nothing, and essentially makes it an open bodied valve which is bound to assist air flow.
07-15-2012, 08:47 PM
#2
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
The Mondo was Vortech's answer to the R-trim-that was way back, mid or early 90's.
The valve on the Big Red is bigger than the Mondo and even bigger on the B57.
The Mondo flows 550cfm@10psi and the B57 flows 1300cfm@10psi.
The valve on the Big Red is bigger than the Mondo and even bigger on the B57.
The Mondo flows 550cfm@10psi and the B57 flows 1300cfm@10psi.
