backdraft408

i am about to be putting the kooks true duals on my 2000 camaro ss and was wondering if there is anything i need to look out for or any modificatons i need to do. project is a 408 with m6 and strange s60 rear end. let me know and if you have any pics of an install i woud like to see them.

spy2520

iTrader: (3)

As long as you have the "required" I installation parts everything is pretty straight forward.

backdraft408

thx. i just wanted to make sure im not going to run into any surpirses.

BrntWS6

iTrader: (7)

Get the MWC DSL since it goes over instead of under, it's the same price. I had to furr mine down 1" as well as the lower PHB. I don't know how a company recommends all this BMR **** when it doesn't fit worth a damn. A lot of guys say it's easy to install but I had a real hard time adjusting it so nothing was hitting. Probably took 3 road tests to work all the "knocks" out. Getting the tips even wasn't easy either. Use an impact to tighten everyting to minimize exhaust leaks.

After I got it all done it is a real nice setup with 0 rasp and sounds better than any y-pipe could. No install pics but this is the finished product.

backdraft408

thx im hoping everything goes smooth. exhaust looks so clean on your trans.