Vehicle Classifieds - 93 rx7 8.8 SRA swap wired and Lsx ready 12.5k

Long story short my 404 rx7 build has came to a end. The motor has developed a internal engine noise and needs to be gone through. I cannot see putting anymore $$$ into this project so the rolling chassis is now for sale. The car will need a engine and tranny.

Asking 12.5k

Will accept partial trade for street/strip fox coupe!!

606-802-1333

93 base originally red and painted chaste white with blk int 8/10
Newest Hinson subframe/tranny mount with solid billet mounts
Hinson bump steer
Hinson SW 1 7/8 long tubes
3" or/y into 4" single bullet
Samberg rad/intake with ls7 maf elbow
Samberg 8.8 SRA swap cradle and housing mod
01 narrowed 8.8 housing 31spilne shafts
2011 gt diff and FRPP 3.73s
T/A performance diff cover
Pez custom harness
-8 fuel system 400lph walbro a1000 reg
Wildwood MC
Braided MC line
New brake pads f/r
PS setup included
New rack boots
Enkei rpf1s with sdrive fr and nt05r rear tires 95%
R1 lip
Cowl hood(being built now)

http://i786.photobucket.com/albums/yy141/csilvers1984/7d7959c7.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/670d725b.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/29d252af.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/442476c2.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/7c05e05c.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/6e900cfa.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/8d896fe9.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/d076d073.jpg[/
mg]
[IMG]http://i786.photobucket.com/albums/yy141/csilvers1984/ae54f5e8.jpg
http://i786.photobucket.com/albums/yy141/csilvers1984/63a68a4b.jpg

bump for a good seller....car could be a beast with a little work!!!!

-Austin

Bump!! Price drop to 12.5k! Will remove parts to accommodate various budgets and accepting partial trades for street/strip fox coupe roller!

Stock gauges work?