Cadillac CTS-V - Catch Can

Which one are you guys running?

Links please!

I use this one.

I "Y" connected the two breather pipes (LS6) to it.

http://www.ebay.com/itm/270490067270?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.saikoumichi.com/

http://www.customcorvetteaccessories.com/oilcatchcan.html

This one. http://www.saikoumichi.com/Stage1_LS1_page.html

Rev extreme makes nice ones or mike Norris motorsports.

I use one from Billet Prototypes
http://shop.billetprototypes.com/Billet-GTO-LSx-Oil-Catch-Can-Premium-GTO44188.htm

This one. http://www.saikoumichi.com/Stage1_LS1_page.html

Did you get any options with yours? What color did you get? Have a pic?

I use one from Billet Prototypes
http://shop.billetprototypes.com/Billet-GTO-LSx-Oil-Catch-Can-Premium-GTO44188.htm

These guys are going out of business I hear.

oops what am I doing in the CTSV section lol

This one. http://www.saikoumichi.com/Stage1_LS1_page.html
+1
Black with red logo (dual)

I like the internal design
http://www.saikoumichi.com/OCC_explanation.htm

What say you gentlemen about this:

http://www.ebay.com/itm/390410485950?item=390410485950&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Did you get any options with yours? What color did you get? Have a pic?

Sorry the only link I have is on the shops facebook. I had the fitting that runs to the intake tube bent at a shallower angle. These cans were originally designed before the LS2 style TB was designed.

http://www.facebook.com/photo.php?fbid=379140632144949&set=a.220078551384492.58663.181324988593182&type=1&theater

http://www.customcorvetteaccessories.com/oilcatchcan.html

Me too:

http://aurora40.dyndns.org/cadi/engine_bay.jpg

Will the Elite Engineering one fit?

http://farm9.staticflickr.com/8007/7528167078_27b82b88d9_b.jpg (http://www.flickr.com/photos/74632166@N04/7528167078/)
EE Catch Can (http://www.flickr.com/photos/74632166@N04/7528167078/) by KKloppe (http://www.flickr.com/people/74632166@N04/), on Flickr

Yes, plenty of room for that one. The previous picture's is located in the same spot.

Are any of these non sealed units so I could empty them if need be?

billet prototype's open up/unscrew to empty.

Im using the elite engineering one its real nice a quality piece. It unscrews to empty.

Are any of these non sealed units so I could empty them if need be?

The CCA one has a drain on the bottom. You could attach a hose to it so you could drain without removing it. But they all have to be sealed during operation.

These guys are going out of business I hear.

oops what am I doing in the CTSV section lol

Well that sucks.....I think the Billet Prototypes is the best looking one.

Maybe I'll go with the elite engineering one then.

I use one from Billet Prototypes
http://shop.billetprototypes.com/Billet-GTO-LSx-Oil-Catch-Can-Premium-GTO44188.htm

That's what I ran in my V.

Is it ever 'too late' to install one of these?

Is it ever 'too late' to install one of these?

When your motor "hydro locks" because it just swallowed a shitload of oil.

http://i1073.photobucket.com/albums/w382/mikesummers/458235_379140632144949_993215491_o.jpg

^^ Sick setup. What coil pack mounting setup are you using, looks like they sit more horizontal opposed to stock.

Thanks. Those are the Katech coil relocation kits. I also have a set of their valve covers.

I'm running the RX Performance

http://forums.corvetteforum.com/c5-parts-for-sale-wanted/2736572-rx-performance-single-and-dual-valve-oil-catch-cans.html

When your motor "hydro locks" because it just swallowed a shitload of oil.

Look at you saying "shit"......I knew you were cool and that CF was pulling you down :)

http://i1073.photobucket.com/albums/w382/mikesummers/458235_379140632144949_993215491_o.jpg

That's badass.

What size tubing are you using on the TB. It looks like a NW 102....is that right? I can't see your sig, so sorry if it's in there. How did you hook it up? I'm trying to figure out how to adapt my NW 102 to my Volant CAI.

The silver looks slick...
BigBuBu - what is the zip tied line on the right?

I chose black however.

The silver looks slick...
BigBuBu - what is the zip tied line on the right?

I chose black however.

Remote clutch bleeder

The silver looks slick...
BigBuBu - what is the zip tied line on the right?

I chose black however.

Thanks vmapper! I like the black. Since my FAST was painted black I wanted to break it up a bit. BTW thanks for the help on the P2101 code. I wound up inspecting the TB conversion harness and it looked like a rat was chewing it. Kinda blurry phone pic but this MFer drove me nuts for about a year. i'm hoping I found the intermittent problem. Never thought to look at a new harness for damage. Sorry for getting off topic.

http://i1073.photobucket.com/albums/w382/mikesummers/Trailerpics003.jpg

Look at you saying "shit"......I knew you were cool and that CF was pulling you down :)



That's badass.

What size tubing are you using on the TB. It looks like a NW 102....is that right? I can't see your sig, so sorry if it's in there. How did you hook it up? I'm trying to figure out how to adapt my NW 102 to my Volant CAI.

Hey Lolly. Thats an old Stealth FFV intake tube kit from way back in the day. Long gone by now. I'll measure the OD and let you know.