Turbonetics Racegate sticking/rusted shut, need recommendations
07-26-2012, 03:52 AM
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Jul 2006
Location: Cherry Hill, NJ
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Turbonetics Racegate sticking/rusted shut, need recommendations My 42mm racegate has been sticking lately. I took it apart and there was quite a bit of rust inside, so its time for a new wastegate. I want to run as low as 7si on the low boost controller setting. Any recommendations?
07-26-2012, 04:31 AM
#2
I have a turbo 42mm racegate for sale now 500 miles on it. 
https://ls1tech.com/forums/parts-cla...dom-parts.html
https://ls1tech.com/forums/parts-cla...dom-parts.html
07-26-2012, 12:13 PM
#3
I'd recommend a Turbosmart WG. Highest quality out there IMO. I wouldnt run anything else. TiAL uses a 2 piece valve, and the turbonetics stuff is huge and heavy.
Turbosmart is also the smallest external size, and lightest weight of the bunch. 1 piece stainless valve, nomex/kevlar diaphragm, and the only ones who offer a threaded spring cup (makes WG spring changes super fast)
Turbosmart is also the smallest external size, and lightest weight of the bunch. 1 piece stainless valve, nomex/kevlar diaphragm, and the only ones who offer a threaded spring cup (makes WG spring changes super fast)
