Vehicle Classifieds - 98 Black Z28 roller

Car is a roller, engine and auto trans have been removed. All engine wiring and PCM left in place.

Car had 160K miles. Interior is pretty clean cloth with just wear, no tears. T-tops do not leak. Only thing that didn't work as it should was the CD player, radio plays fine.

Only mods are Borla exhaust with a cutout. It had an electronic cutout on it that was stuck half open so I just removed it. So the car is pretty much running through the cutout only but isn't very loud driving but sounds good when you get into it a little.

There is a small dent behind the drivers door but the paint is not messed up. Its never bothered me enough for me to worry about getting it fixed, it was in the car when I bought it. The clear coat is peeling off the rear bumper in 2 spots and the front of the car has 160k miles worth of rock chips and age. The dash has one crack about an inch long total right at the vent.

Asking $1800 firm. Good car for someone that has an engine/trans ready and needs something to stick it in. I have clear title in hand.

Here's a link to a bunch of pics: http://www.flickr.com/photos/wecruisin/sets/72157633301770670/
http://farm8.staticflickr.com/7033/6655383401_9fcdf3b572_z.jpg

http://farm8.staticflickr.com/7006/6655432737_4356bfa67b_z.jpg

http://farm8.staticflickr.com/7023/6655406609_8d0ae0c5a2_z.jpg

http://farm8.staticflickr.com/7001/6655389697_6bee1897d5_z.jpg

http://farm8.staticflickr.com/7165/6655378557_00d7fda39b_z.jpg

Car is located outside of Roanoke Rapids, NC. 2 Miles off of I-95 and about 2 miles south of the VA state line.

Bump. Engine and trans have been removed. All factory wiring still in place.

Offers?

TTT hate to see the car just sitting

bump..

So the pcm is included?

Still available. All wiring and PCM is still in the car. A solid roller that just needs the engine and trans.

Also has 3:23 rear gears from the factory

Had some interest but no money yet. Make an offer.

Bumping one last time before I start parting, it's really too nice to take apart.

Will trade my 71 for it. Will bring it to pick up the other.

Price dropped to $1800 before I start parting out.

Don't part it be patient, these are getting harder to find in decent shape

wow thats a steal of a price!

Don't part it be patient, these are getting harder to find in decent shape

I'm trying, but at the same time I hate seeing it sit.

wow thats a steal of a price!

I think so too, but its just not drawing much interest. Anyone that has an engine/trans assembly can have a running car in a days time.

Link to more and bigger pics: http://www.flickr.com/photos/wecruisin/sets/72157633301770670/

ill start off the bids at a dollar lol YES one dollar anyone care to match that haha no but really dont part it out horrible idea i would buy it if i was closer and BUMP!!!!

Id put a stock 5.3 in it, plus a 4L80e, and a DIY turbo kit and have a wicked fast car for $5000 or so

bump ttt

Some Pm's but not sold yet. Bump

To the top

Im interested pm me your number so we can communicate easier

Bump for the weekend. I can't believe this thing is still sitting here.

bump for a nice Z at a good price

Oh man, dont part it out, if only you were closer, ive been lookin' for z/28 roller for who knows how long, if only. just have patience man, someone is gonna come along.

bump again

Bump again, how about $1600

wow someone buy this thing!

Why must you be 11 hours away

is the car still for sale pm number

Why must you be 11 hours awayAren't the best deals always a long distance? lol That's how it's always seemed to me.


is the car still for sale pm number
Pm sent