Street Racing & Kill Stories - 04 cobra vs heads cam z28

Went to the local uti RIDE fest here in nor cal on the way home ran against this 04 cobra. He said later after the run he made 486 wheel. we ran a few more times no vids of the other runs they all pretty much ended the same as the vid..

the Vid is a 3 gear pull from about 45-50 sorry its only one gear pull there was hella traffic so i had to get out of it.

cool older guy every time i run up agasint a termi i start to enjoy their company more and more
http://youtu.be/5ZWKKMCKM6s

was that a race?lol

i wish mustang drivers could drive...

was that a race?lol

What he said?

Seriously? Why post that shit? I do little things like that to other cars almost every single day just to set them up for a real run: Real meals utilize the appetizer to set up the main course.... Desert comes later as you tell your friends.

BTW you left at least a half second early and he was getting ready to reel you in hard when you let up. "just saying"

just like if any of you read the post due to traffic i let out at the top of third gear it was rush hour time we did more runs again the gopro was on the wrong side for the runs he still lost every time he was not "reeling me in at all"
its going to take more then a pulley swapped cobra to pull on my car,

just saying ill try to get better vids next time

just like if any of you read the post due to traffic i let out at the top of third gear it was rush hour time we did more runs again the gopro was on the wrong side for the runs he still lost every time he was not "reeling me in at all"
its going to take more then a pulley swapped cobra to pull on my car,

just saying ill try to get better vids next time

Care to elaborate?

Care to elaborate?

car made 492/ 488 last dyno with a stock ls6 intake stock tb and stock maf....

fast 102 is in the works

FI, N/A, Displacement? Those numbers certainly would have no problem with a pullied cobra.

im interested to know what else you have done to the motor

Cobras are pretty slow unless they get a big mammoth on them.

FI, N/A, Displacement? Those numbers certainly would have no problem with a pullied cobra.

na

lol i try and get away with calling it a heads cam car lol

418 ls3 11.5.1
WWCH heads
custom cam
:) like i said just a heads cam car

FI, N/A, Displacement? Those numbers certainly would have no problem with a pullied cobra.

while we where on the freeway he said he put down 486... i have seen some strong termi's make some good power with a stock blower and bolt ons

What he said?

I didn't see one either

Cobras are pretty slow unless they get a big mammoth on them.

You have Cobra's down there? And if so, you've out ran them with that bloated boat?


If you ever come north of the border with that hog, let me know so I can yank the front bumper off it with my slow Cobra.

You have Cobra's down there? And if so, you've out ran them with that bloated boat?


If you ever come north of the border with that hog, let me know so I can yank the front bumper off it with my slow Cobra.

whoaoa!! we gotta badass ova heaa!!!

oh wow... 2SS must have struck a nerve(or cylinder)...lol. Never seen you respond like that Heater...

Cobras are pretty slow unless they get a big mammoth on them.
I'm looking at a picture of a Cobra and a Mammoth and I can't figure out how you would strap the mammoth on? talk about aero drag....
You have Cobra's down there? And if so, you've out ran them with that bloated boat?

If you ever come north of the border with that hog, let me know so I can yank the front bumper off it with my slow Cobra.

His SS should be somewhere between mid 9's and mid 10's depending on hook: if your shit can't run 8's then you won't be yanking his bumper off.

Woulda, coulda, shoulda...easy to troll on the net, and even easier from another country.

hey leave me outa the chevy vs ford bash I have come to enjoy termi cobras and thats saying a lot coming from a mustang hater as my self

So now on ls1tech cobras can't be called slow or your bumper will ripped off! Lol

So now on ls1tech cobras can't be called slow or your bumper will ripped off! Lol



So you want some?






















J/K :)

I got 6 to choose from you take your pick! lol.

I got 6 to choose from you take your pick! lol.


Got a couple myself :drive:

My car is fast and yours is slow

^on the highway too ?

na

lol i try and get away with calling it a heads cam car lol

418 ls3 11.5.1
WWCH heads
custom cam
:) like i said just a heads cam car

What heads? Obviously cathedral if you're running an LS6 intake. My buddy runs the PRC 237cc cathedral port heads on his 377ci LS3, hauls ass!



Oh, and you took the bump. Next time give the poor ferd the hit to make it fair. :lol:

WWCH 245s :)

Cobras are pretty slow unless they get a big mammoth on them.

not true.
got a buddy running 24psi on a fully built 02 mach with forged internals, 4:10 gears, blah blah
he paid $6.5k for the mammoth
hes only touching 537whp through a manual and he has over $40k in the car
for $40k id have 2 bad ass fbodies that smoke him sliding sideways down the track.

You have Cobra's down there? And if so, you've out ran them with that bloated boat?


If you ever come north of the border with that hog, let me know so I can yank the front bumper off it with my slow Cobra.

http://weknowmemes.com/wp-content/uploads/2011/12/that-guys-actually-pretty-badass.jpg

^^^ LoL, better recognize :cool: