my 02 ws6 vs my friends new 01 ss
08-05-2012, 06:59 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jul 2011
Location: clementon, nj
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
my 02 ws6 vs my friends new 01 ss My buddy just got an 01 ss stock minus magnaflow cat back/slp lid. My car has pacesetter headers, tsp duals, moster stage 2 clutch, tick master, lid, tune, and some suspension.
So we went out and got a couple runs in to see how it would hold up against my car, both 6-speeds btw.
First run from a 40 roll, both cars in second gear. I honked it of and take the hit pulled about a car on him through each gear had about 3 on him by 110mph. He said he was shifting 5500 rpm.
Next run was about a 50-60 roll probably closer to 50. I was in 3rd idk about him. He honked it off I pull a car off the hit and pull about 2 more by 100. He said he shifted at 5500 again.
Final run was from a 20. Both cars in first gear. I honked it off he managed to get the hit
lol. He pulled a fender and held it until the top of second. I started reelling him in by the top of second and pulled a car and a half through third. Shut it down at about 90. Was still pulling when we shut it down.
His car runs good, Ive been told I have a very strong running bolt-ons car. Will run again and get some videos when I manage to get a camera man or go pro lol.
So we went out and got a couple runs in to see how it would hold up against my car, both 6-speeds btw.
First run from a 40 roll, both cars in second gear. I honked it of and take the hit pulled about a car on him through each gear had about 3 on him by 110mph. He said he was shifting 5500 rpm.
Next run was about a 50-60 roll probably closer to 50. I was in 3rd idk about him. He honked it off I pull a car off the hit and pull about 2 more by 100. He said he shifted at 5500 again.
Final run was from a 20. Both cars in first gear. I honked it off he managed to get the hit
lol. He pulled a fender and held it until the top of second. I started reelling him in by the top of second and pulled a car and a half through third. Shut it down at about 90. Was still pulling when we shut it down.His car runs good, Ive been told I have a very strong running bolt-ons car. Will run again and get some videos when I manage to get a camera man or go pro lol.
08-05-2012, 08:44 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jul 2011
Location: clementon, nj
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Idk, hes a decent driver, I have headers/duals/lid and a tune compared to his catback/lid. I base lined 330 before the tune and put 351hp down after so I feel like I pulled just as much as a should have.
08-06-2012, 12:12 PM
#7
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jul 2011
Location: clementon, nj
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
probably wouldnt have pulled as fast as I did. Still wouldve though like I said from the 20 he was shiftingat 6k, and I was starting to pull on him through 3rd.
Trending Topics
08-08-2012, 02:52 PM
#8
12 Second Club
iTrader: (2)
Join Date: Jul 2009
Location: New Smyrna Beach
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a good time, wish i had a comparable car to run around here. Have either of you guys done the free mods? any weight reduction for either car?
08-10-2012, 12:30 PM
#9
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Jul 2011
Location: clementon, nj
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
I dont have a spare tire/jack or back seats. Idk if he still has his spare or not, he usually tosses all that stuff the day he gets it. Ive only done air delete.
