FAD2BLK93

Just like the Hot Cam thread...What are u 503 guys putting down in the quarter?Just curious!

96lt1m6

iTrader: (31)

Well,depending on the combination..
My buddy is Bolt ons, 3600vig,3.42s,madtuner and Hoosiers 12.77@106 with 3500'DA

96lt1m6

iTrader: (31)

He also had knock retard due to the drivers side header banging the floor......

joelster

chas010 had the fastest one that I know of. He got it into the 10's N/A. Something like a 10.98 at 122.xx . I'm not sure exactly but I know that is close to what he ran.

FAD2BLK93

Damn 10's with a 503!!!! Now that is something to shoot for. My best without a stall is 12.86@110.91. I know the stock stall is killing me! I figure at least .5 pickup with a 3600.

strasser_3

iTrader: (18)

That mph is good for 11.9 with a stall and slicks.

96lt1m6

iTrader: (31)

Yeah you definitely run at a good altitude... my other buddy REFUSES to add a stall with his 503 and he barely gets a 13.9

lt1-xjs

My buddy ran 11.95 cam only with bolt-ons.

FAD2BLK93

I would LOVE to be in the 11's. Would i really pick up that much with a 3600? I thought MPH would come down with a stall? Right now i am 2.05 60ft damn near every run. When i had the stock cam i was in the 1.94 range pretty consistantly.

lt1-xjs

I pickedup 5 tenths with the Yank SS 3600 and raising my shift points.

mp_514

My '96 Vette ran 11.69@115.5 with a 1.58 60' using a 503 cam with TrickFlow 21* heads, long tube headers, ported intake, 58mm TB, Yank PT 4000, 3.73 gears and Hoosier DR's.