scarbrow
08-07-2012, 04:45 PM
1990 Chevy Silverado Regular Cab Short Bed, Step side
6.0L LQ4\4L80E, wiring harness and computer out of a 2006 HD 3\4 ton silverado
4.10s / posi
255,XXX miles on truck
35,XXX on motor/trans 33K at time of swap
Power windows, and locks
F body oil pan, pickup tube, windage tray, dipstick
F body electric fans
C5 wagon wheels with good tires
SS truck mirrors
New parts at time of swap....
Beltech 2 inch drop spindles
Beltech rear flip kit
Beltech nitro drop shocks on all 4 corners
DJM 3 inch drop springs
Upper ball joints
Lower ball joints
Wheel bearings
Rotors
Calipers
Brake pads
Outer tie rod ends
Rear drivers wheel cylinder
Walbro 255 fuel pump
Corvette fuel filter/regulator
Braided fuel lines
Custom made driveshaft
K & N air filter
2 1\2 inch true duals with flowmaster knockoff mufflers
Serpentine belt
Battery (relocated to bed )
Alignment
Motorsport Technologies wheel adapters to run 5 x 4.75 wheels
5% window tint
Hood
Passenger fender
Drivers cab corner
Headliner
All stock gauges are wired up and work, except the fuel gauge reads full all the time and speedo needs a dip switch to program for the gear swap
Interior is in good shape,
No A\C
Windshield has a crack
The paint on the truck is an epoxy primer which I did myself. That being said it was my first paint job and the bed turned out pretty good, but a few days later when i painted the cab I had some gun issues so the cab didn't turn out so good, it has some runs in it and is really splotchy.
I think this truck would make an awesome tow rig with some helper bags.
$6900 OBO
call or text 417_773_1099
http://img33.imageshack.us/img33/3765/trackv.jpg
http://img857.imageshack.us/img857/3259/pic2l.jpg
http://img545.imageshack.us/img545/318/pic3xr.jpg
http://img809.imageshack.us/img809/2864/pic1xf.jpg
http://img835.imageshack.us/img835/5084/pic4n.jpg
http://img843.imageshack.us/img843/7352/truc8.jpg
http://img856.imageshack.us/img856/3014/1003584x.jpg
http://img444.imageshack.us/img444/8513/3m93o93l05u15r15s6b3179.jpg
6.0L LQ4\4L80E, wiring harness and computer out of a 2006 HD 3\4 ton silverado
4.10s / posi
255,XXX miles on truck
35,XXX on motor/trans 33K at time of swap
Power windows, and locks
F body oil pan, pickup tube, windage tray, dipstick
F body electric fans
C5 wagon wheels with good tires
SS truck mirrors
New parts at time of swap....
Beltech 2 inch drop spindles
Beltech rear flip kit
Beltech nitro drop shocks on all 4 corners
DJM 3 inch drop springs
Upper ball joints
Lower ball joints
Wheel bearings
Rotors
Calipers
Brake pads
Outer tie rod ends
Rear drivers wheel cylinder
Walbro 255 fuel pump
Corvette fuel filter/regulator
Braided fuel lines
Custom made driveshaft
K & N air filter
2 1\2 inch true duals with flowmaster knockoff mufflers
Serpentine belt
Battery (relocated to bed )
Alignment
Motorsport Technologies wheel adapters to run 5 x 4.75 wheels
5% window tint
Hood
Passenger fender
Drivers cab corner
Headliner
All stock gauges are wired up and work, except the fuel gauge reads full all the time and speedo needs a dip switch to program for the gear swap
Interior is in good shape,
No A\C
Windshield has a crack
The paint on the truck is an epoxy primer which I did myself. That being said it was my first paint job and the bed turned out pretty good, but a few days later when i painted the cab I had some gun issues so the cab didn't turn out so good, it has some runs in it and is really splotchy.
I think this truck would make an awesome tow rig with some helper bags.
$6900 OBO
call or text 417_773_1099
http://img33.imageshack.us/img33/3765/trackv.jpg
http://img857.imageshack.us/img857/3259/pic2l.jpg
http://img545.imageshack.us/img545/318/pic3xr.jpg
http://img809.imageshack.us/img809/2864/pic1xf.jpg
http://img835.imageshack.us/img835/5084/pic4n.jpg
http://img843.imageshack.us/img843/7352/truc8.jpg
http://img856.imageshack.us/img856/3014/1003584x.jpg
http://img444.imageshack.us/img444/8513/3m93o93l05u15r15s6b3179.jpg