New LS1 Owners - Newbie Tech - How hard is this going to be....

I need to pull my current LS1 to put in my 408. The cars torn aprt in my garage with no lift but i do have a cherry picker. What all needs to be done to get this beast out? Unbolt the motor mounts and unbolt it from the tranny? Its essentially a bare block juat sitting in the car right now. No heads, intake, radiator, etc

Ya I would support the trans and split it from the moter. Then pull the SB out with the picker. You have already done all the hard work lol.

Haha good deal! Just slide some 2x4's under the trans or whats the best way to support it?

Haha good deal! Just slide some 2x4's under the trans or whats the best way to support it?

I would leave the cross member in and attached to the trans, If you have a spare floor jack or scissor jack place that under the bell housing. Since you have a M6 trans the clutch and fly wheel will come out with the motor.