Vehicle Classifieds - *Feeler* 1993 Rx7 Rolling chassis *All swap parts there* ready for drivetrain




69blueSS
08-10-2012, 09:28 AM
Decided would like to have a more drag oriented car so am seeing what interest there would be in my 93 RX7 FD. all swap parts are there just needs drivetrain dropped into car. car would make a very nice road racer. Everything works and is right, was a running and driving car before rod bearing gave. all parts that are installed have less than 200 miles on them. previous owner painted engine bay white and intended on painting rest of car white and got alot of over spray on the exterior paint so car could use full paint job to finish off the white intentions. Have stock hood and aftermarket hood. Front seats have been recovered and also new carpet.

New pettit track pro II coil overs $1,500
superpro bushings $400
atomic rex steering rack $1200
speedhut gauge assembly $700
feed wide front fenders $450
new XXR 521s w/ new 275/35/18 spar specs $1600
ls1 gto harness $200
pez harness mod and fan box $450
pez modified front harness $400
samberg radiator/intake setup $1200
samberg engine cradle w/bumpsteer correction & 8.8 rear subframe $1800
feed side skirts $250
spoolin performance longtubes $ 800
complete header back exhaust $800
new 8.8 diff w/ modified cover $500
upgraded inner cvs $400
dss axle bar kit $500
dss aluminum driveshaft for 8.8/t56 $400
cjmotorsports dual fum pump holder $300
DW 300lph fuel pump $100
aeromotive FPR $130
All fuel lines from tank to rails (ss & blk nylon)
Lingenfelter oil cooler adaptor $100
mocal oil thermostat $150
canton oil cooler $100
canton 3 qt accusump and electric valve $470
all needed -10 oil lines to plumb it all together
NRG 3.0 quick release $150
NRG hub adapter $100
Sparco “Ring” steering wheel $240
battery/ relocation kit everything battery related
abs delete
929 brake master

Total: $15490 in new parts, not including many other miscellaneous pieces plus the car itself

I also have L92 top end parts i could possibly let go with the car.

Asking $14900 obo for rolling chassis

will consider trades also

http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/app_mail_2-2784-48f9005b-6886-43a0-af45-85961390d540-photo.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/app_mail_2-2787-7ad8f68a-5d81-49fc-b939-75c5c2f9e3b2-photo.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/app_mail_2-2777-667f5115-03a6-4aa5-b9a2-79fa607b8b71-photo.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd08f7-620b-dcf8.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/12215441.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/78444418.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/409530ee-eb99-4560.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo33tm.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo32tr.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo34.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc03454x.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc03469st.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photoxjn.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc03283e.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc03524c.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc02237m.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd0adb-d2a9-3011.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd0adb-dc60-9439.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/409530ee-ebc3-afb2.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/dsc02238i.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd0910-affb-f809.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd09ef-8232-015f.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd09ef-819a-5108.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd09ef-80aa-7028.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/a6cd09ef-80e6-4aaa.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/92996910.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/78444418.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/49200224.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/409530ee-e99f-db0c.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/46ea6ae6-8f9b-7cd3.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/46ea6ae6-67b2-c084.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/409530ee-3647-c571.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/46806db6-34ad-b27f.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/cjpump.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo27yy.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo26sh.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo25zf.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/diffx.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/diff2.jpg
http://i96.photobucket.com/albums/l193/gearheadls1/Rx7%202/photo29a.jpg


69blueSS
08-11-2012, 12:22 PM
ttt...

69blueSS
08-13-2012, 08:33 AM
bump it up


69blueSS
08-15-2012, 05:23 AM
will consider trades

MAINESUPRA
08-15-2012, 08:14 AM
So this does or doesnt come with LS engine?

69blueSS
08-15-2012, 08:39 AM
So this does or doesnt come with LS engine?

does not come with engine or t56. I do have L92 top end that was on it i could still let go with the car, if someone had a 6.0 short block they wanted to throw in it.

69blueSS
08-16-2012, 05:18 AM
bump..

69blueSS
08-17-2012, 05:30 AM
Here's the build thread on the car if anyone would like to see http://www.norotors.com/index.php?topic=254.0

camaroboy14
08-17-2012, 06:51 AM
So it's 15k for the roller ?

69blueSS
08-17-2012, 11:28 AM
So it's 15k for the roller ?

Yes $15.5k for the roller

These cars are not your typical fbody when it comes to what goes into building one and the rarity of parts.

These guys have all been involved with builds and know what it takes http://www.norotors.com/index.php?topic=13019.0;topicseen

Trick450r
08-17-2012, 06:37 PM
So it's 15k for the roller ?

I take it you've never priced out a project like this?...Its definitely not for someone on an fbody budget.

Good deal man, I know I've got more than that in my 93', even in roller form.

GLWS

69blueSS
08-19-2012, 11:22 AM
sunday bump

69blueSS
08-21-2012, 05:17 AM
ttt....

69blueSS
08-22-2012, 05:16 AM
bump...

69blueSS
08-24-2012, 08:19 AM
Friday!!

69blueSS
08-27-2012, 11:20 AM
bump..

gallo-lo
08-28-2012, 06:52 AM
I'll make you a deal, for a x275 project car 80% done no junk!!!
For the you're complete project, with motor and tranny.. Lmk and pm me I'm in ny LI.

69blueSS
08-29-2012, 08:11 AM
ttt...

69blueSS
08-30-2012, 05:13 AM
pms replied

69blueSS
08-31-2012, 08:18 AM
ttt...

69blueSS
09-02-2012, 02:29 PM
bump...

69blueSS
09-03-2012, 12:31 PM
price drop... $14,900

69blueSS
09-04-2012, 08:20 AM
ttt...

69blueSS
09-05-2012, 09:08 PM
bump..

69blueSS
09-07-2012, 05:28 AM
ttt...

69blueSS
09-09-2012, 09:56 PM
bump..

Rotary_Rob
09-10-2012, 07:27 PM
was this cyans?

69blueSS
09-11-2012, 08:50 AM
was this cyans?

Yes it was

69blueSS
09-12-2012, 08:36 AM
ttt..