Stereo & Electronics - Double Din radio brackets
08-12-2012, 01:54 PM
I bought a Pioneer AVH-P8400BH head Unit and not quite looking into all that I needed for this specific converison...... I ordered and over priced bezel from one of the only two places that make them and they sent me brackets cheaply made from some sheet metal any wonder those were free:S they do NOT match up with the mounting holes in the dash infact they are for a camaro which only has 2 holes not the 3! And Ive tried all the holes on the head unit does anyone know where I can get a decent univeral set ?
08-13-2012, 04:43 AM
learn how to use a drill?
I made my own brackets. Its easy.
08-13-2012, 12:11 PM
Where did you get the double din mount kit? Most companies dont offer double din mount kits for our cars thats why most of them are custom done. The only person I know who does offer them is DDmods as far as I know.
08-13-2012, 04:50 PM
I know how to use a drill the difference between the two is that regardless of where you put it the brackets is either above, below or in the center and their isnt enough metal to drill trogh without jacking up the the bracket or not having enough edge for the screw to tighten down and like wise on the head unit theirs a long drilled out slot so you can move the head back and forth and if i drill their their wont be enough meat on the metal for the screw to hold onto and if I put a washer on it the screw will be to short.......lets mke this is easy ....is their any univeral mounting brackets that will attach to a single din and yet still fasten to a double ?
08-14-2012, 03:09 PM
I've been doing car audio for about 15 years professionally, and have always made brackets for these cars. Just did my boss' wife 02 Ram Air, and made the radio brackets out of backstrap.
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO