mitchntx

iTrader: (14)

I tried a search, but I guess I can't formulate the correct search syntax. I know this has to have been asked and answered before. So, please, help me out here ...

I have a '98 TA and looking at an 03 LS6 from a Vette.

What are the subtle differences that will give me headaches?

Sensor connectors? Starter? Wiring harness in general?

Any accessory issues?

What do I need to swap over?

TIA

goober35

iTrader: (1)

Oil pan for one. Exsesorys like A/C and alternater. Crank pully, so most of the stuff on the front you already have. I think all the sensers are the same but you will need to up you sencers in. I dont think your wiring harness will hook up to the 03 sencers. Other than that every thing is the same i think. Not sure on the coil pack hook ups might be diff.

Scalpel

iTrader: (4)

Sensors are all the same except maybe the driver's side coolant temp sensor. Oil pan must be swapped over and the front harmonic balancer, alternator, AFAIK.

Pro Stock John

iTrader: (34)

Coolant temp sensor that goes into the driver's side head is different, 98 is different from 99+.

Gary98Z

iTrader: (9)

Awhile ago I was thinking about this myself. The info I found said that besides the oil pan, it was pretty straight forward. I think the guy who I asked went by the name of SS on your Six.

Glenn98ZM6

starter bolt pattern?

HioSSilver

iTrader: (8)

gravy, bolt it in with your accesories and go . I have a 02 ls6 in my 99 SS with bolt-ons made 399 rwhp untuned 407 tuned check the sig.

mitchntx

iTrader: (14)

So, I just use my sensors, and everything bolts up ... is that what I'm reading?

C'mon ... it can't be THAT easy ...

HioSSilver

iTrader: (8)

yeap that easy!!!!!

Jay 95WS6

oil pan too

Scalpel

iTrader: (4)

Yep, that easy