11 Second Club - 11.5@119 - Video inside : )

Hi guys.

I went to the track today with my 2002 Trans Am WS6. This is my first run ever, and here is the result, i´m pretty happy about it. :cool:

http://i62.photobucket.com/albums/h111/hilio/Maruslippinn.jpg

PONTIAC TRANS AM WS6 MY02

346ci LS1 with 11,2 CR.
AFR 205 Torque Monster Cyl. Heads, Milled To 62cc.
MS4 Camshaft. Melling High Flow Oil Pump.
Pacesetters LT Headers, ORY With Dual DMH El.Cutouts.
LS6 Intake Manifold, Descreened And Ported MAF, Stock Throttlebody.
K&N Air Filter, Stock Lid.
Circle D 5C Converter, Built 4l60e Transmission, Stock 10 Bolt, 3.23 Gears.

Thats about it i think.

Here is a video of the run.

http://www.facebook.com/video/video.php?v=4018778201393

Good run man! Details on the car??

Update with details about the car.

Nice! Work on the suspension and 60ft. The car has 10 second NA capabilities.

:hail:


here are two photos too

http://motorsport-photos.net/FS/9eb91ddd-970c-4b2b-8317-593fbf6b89f4.jpg
http://motorsport-photos.net/FS/ee504122-c9cc-486f-b2a9-3e56a8d5ab2d.jpg

he was on 18inch drag radials ad full weight car.... very impressive first time out ever

congrads Hilio :nod:

Baezi

Thanks Baezi :cool:

:hail:


here are two photos too

http://motorsport-photos.net/FS/9eb91ddd-970c-4b2b-8317-593fbf6b89f4.jpg
http://motorsport-photos.net/FS/ee504122-c9cc-486f-b2a9-3e56a8d5ab2d.jpg

he was on 18inch drag radials ad full weight car.... very impressive first time out ever

congrads Hilio :nod:

Baezi

So close to lifting that driver side tire. Congrats on the time! Get that 60ft down to a 1.3/4 and it's :burn:. You'll be in bottom 11's/high 10's in good air

So close to lifting that driver side tire. Congrats on the time! Get that 60ft down to a 1.3/4 and it's :burn:. You'll be in bottom 11's/high 10's in good air

All the more reason to get an anti roll bar so that doesn't happen!

Op, nice car and great times!

slicks, skinnies and cold air and you're 10's.

Badass...

Thanks guys :)

Hi guys.

I went to the track today with my 2002 Trans Am WS6. This is my first run ever, and here is the result, i´m pretty happy about it. :cool:

http://i62.photobucket.com/albums/h111/hilio/Maruslippinn.jpg

PONTIAC TRANS AM WS6 MY02

346ci LS1 with 11,2 CR.
AFR 205 Torque Monster Cyl. Heads, Milled To 62cc.
MS4 Camshaft. Melling High Flow Oil Pump.
Pacesetters LT Headers, ORY With Dual DMH El.Cutouts.
LS6 Intake Manifold, Descreened And Ported MAF, Stock Throttlebody.
K&N Air Filter, Stock Lid.
Circle D 5C Converter, Built 4l60e Transmission, Stock 10 Bolt, 3.23 Gears.

Thats about it i think.

Here is a video of the run.

http://www.facebook.com/video/video.php?v=4018778201393

did you ever dyno it to see wat it was putting out?

thats damn good, thats what my 418 runs in the quarter so far same sixty foot and MPH, I have alot more horses and I am full weight also, mine is a six speed so I am sure that slows me down a bit, a auto and a stall id probably be in the tens.

Hi guys.

I went to the track today with my 2002 Trans Am WS6. This is my first run ever, and here is the result, i´m pretty happy about it. :cool:

http://i62.photobucket.com/albums/h111/hilio/Maruslippinn.jpg

PONTIAC TRANS AM WS6 MY02

346ci LS1 with 11,2 CR.
AFR 205 Torque Monster Cyl. Heads, Milled To 62cc.
MS4 Camshaft. Melling High Flow Oil Pump.
Pacesetters LT Headers, ORY With Dual DMH El.Cutouts.
LS6 Intake Manifold, Descreened And Ported MAF, Stock Throttlebody.
K&N Air Filter, Stock Lid.
Circle D 5C Converter, Built 4l60e Transmission, Stock 10 Bolt, 3.23 Gears.

Thats about it i think.

Here is a video of the run.

http://www.facebook.com/video/video.php?v=4018778201393


ho would a 383 stoker kit work on this setup

what are the gains....

baezi

We don´t have any dyno bench here in ICELAND for public use, so i´m sure about the rwhp.

oh wow iceland? thats cool. must be a rare car u have up there

We have few up here, but they are all mostly stock.

Don't know dick about auto setups but wouldn't those 3.23s hurt you with that big of a cam?

Don't know dick about auto setups but wouldn't those 3.23s hurt you with that big of a cam?

No it seemed not, i have 3.90 now and i lost 3 mphs on it ! I was also running another tire setup.

No it seemed not, i have 3.90 now and i lost 3 mphs on it ! I was also running another tire setup.

3.90 would be good for 28inch i think NA , but a 3,73 would be the perfect ratio for 26inch tires and NA setup i would say


3.42 is the ratio for your future plans :D

rock on

Baezi

That is an awesome first time out result! I can only imagine how happy you where with the results.

What's the cars HP/Tq?...