epglxspooky
08-19-2012, 12:37 PM
2000 Pontiac Firebird Formula
119,000 Miles (Rounded)
Cam package from Texas Speed
Torquer V2
114 LSA
Pac .600 Beehive Single Springs
7.400 Pushrods
Timing Chain
LS2 Timing Chain - Texas Speed
Lifters
LS7 Replacement Lifters - Texas Speed
Tune
Mail order tune - Texas Speed
Intake Manifold
LS6 Intake Manifold
Air Intake
K&N Airfilter
SLP Flopac (everything but Smooth Bellow)
Headers
Stainless Steel - Ebay
Y-Pipe
SLP Stainless Steel Y-Pipe - Summitracing
Clutch Kit (+ more)
http://www.ecpcorvette.com/
LS6 Clutch Kit (Includeds Flywheel, Disc, Pressure Plate & Alignment Tool)
F-Body Slave
F-Body Master
F-Body HD Throwout bearing
Flywheel & Pressure plate bolts
Springs
SLP/Eibach Lowering Springs - Texas Speed
Wheels
Z06 Wheels (18 inch Front and Rear)
Tires - x4
265 35 ZR 18 FIERCE UHP TIRE TIRES
Motor has been resealed FRONT to BACK and TOP to BOTTOM with a new gasket set.
Aftermarket RamAir hood.
Connections for external amp
Newer water pump.
Newer Idler and tension-er
Newer Idler and tension-er AC
Full open throttle body blade opening Mod
Flow Master 40 Series
The BAD.
Roof is bubbling up.
Front bumper shows stress marks and rock chips.
Seats are worn out.
The EXTRA
AC does work, but takes a little before it kicks in.
T-Tops do not leak.
Driver window motor replaced 8-6-12
All mods listed above was done when the car roughly had 114,000 Miles.
No trades, 6700.00 OBO
Any questions, need more pics, email me epglxspooky@gmail.com
119,000 Miles (Rounded)
Cam package from Texas Speed
Torquer V2
114 LSA
Pac .600 Beehive Single Springs
7.400 Pushrods
Timing Chain
LS2 Timing Chain - Texas Speed
Lifters
LS7 Replacement Lifters - Texas Speed
Tune
Mail order tune - Texas Speed
Intake Manifold
LS6 Intake Manifold
Air Intake
K&N Airfilter
SLP Flopac (everything but Smooth Bellow)
Headers
Stainless Steel - Ebay
Y-Pipe
SLP Stainless Steel Y-Pipe - Summitracing
Clutch Kit (+ more)
http://www.ecpcorvette.com/
LS6 Clutch Kit (Includeds Flywheel, Disc, Pressure Plate & Alignment Tool)
F-Body Slave
F-Body Master
F-Body HD Throwout bearing
Flywheel & Pressure plate bolts
Springs
SLP/Eibach Lowering Springs - Texas Speed
Wheels
Z06 Wheels (18 inch Front and Rear)
Tires - x4
265 35 ZR 18 FIERCE UHP TIRE TIRES
Motor has been resealed FRONT to BACK and TOP to BOTTOM with a new gasket set.
Aftermarket RamAir hood.
Connections for external amp
Newer water pump.
Newer Idler and tension-er
Newer Idler and tension-er AC
Full open throttle body blade opening Mod
Flow Master 40 Series
The BAD.
Roof is bubbling up.
Front bumper shows stress marks and rock chips.
Seats are worn out.
The EXTRA
AC does work, but takes a little before it kicks in.
T-Tops do not leak.
Driver window motor replaced 8-6-12
All mods listed above was done when the car roughly had 114,000 Miles.
No trades, 6700.00 OBO
Any questions, need more pics, email me epglxspooky@gmail.com