Koni/Strano/UMI Installed (Showing Off)
08-21-2012, 10:30 PM
#1
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Koni/Strano/UMI Installed (Showing Off) Got it all installed and dialed in this past weekend. Rear end is centered, rear Konis 3/4 turn up from full soft, fronts 4 sweeps down from full hard, need an alignment but Sam squared me away with that too.
295/18 Nitto NT05s fit with NO hammering, though they made it with like, 1/3 of an inch of clearance.
Money Shot (Literally)
Close Up
Show Off
295/18 Nitto NT05s fit with NO hammering, though they made it with like, 1/3 of an inch of clearance.
Money Shot (Literally)
Close Up
Show Off
08-22-2012, 12:53 PM
#4
Thanks for posting the pics... how's it drive????? 
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
08-22-2012, 08:41 PM
#6
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
08-23-2012, 10:57 AM
#8
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
08-23-2012, 07:07 PM
#11
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
08-24-2012, 11:53 AM
#14
TECH Resident
iTrader: (3)
Join Date: Jul 2009
Location: Fenton, MI
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Nice job. I'm running pretty much same combo except for LCA's and I know what you mean about outperform my level of comfort for driving. But I will say this. Since they do handle so well, if you get into trouble, she comes back very very nicely! Those NT05's are the bomb with this set up.
08-24-2012, 07:51 PM
#15
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
08-26-2012, 11:58 AM
#17
TECH Apprentice
iTrader: (1)
Join Date: Dec 2008
Location: Fuquay Varina, NC
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Nice setup... My bilstein's are starting to wear out and I decided I'm going with Koni's next cause I'm not quiet happy enough with how it handles. Hope they are worth the 1 grand though!
08-28-2012, 02:54 PM
#20
