adanp

What size of bolts do i use to remove my harmonic balancer off my 95z28

ahritchie

iTrader: (1)

Lol...you mean what size wrench? Not sure, but it takes all of 30 seconds to figure it out if you have a socket set; eyeball it, see if the socket fits, if not repeat one size up/down until you have the right size socket/wrench...that is my highly scientific method

Or, adjustable crescent wrench!

TwoFast4Lv

iTrader: (8)

5/8th to remove stock bolt.

standard balancer remover with a LS1 stud in the center instead of a cone

adanp

Off the puller the bolts that come with the kits dont seem to fit right

Paul Bell

iTrader: (9)

This thread ought to be entertaining...

speed_demon24

iTrader: (6)

!!!!!!

TwoFast4Lv

iTrader: (8)

Just to be clear on what you need I have provided a picture of the proper tool used to pull a LTx Balancer hub off the crank






If you want I can make it bigger

adanp

Yeah how bout the three bolts i need

Paul Bell

iTrader: (9)

These pullers usually come in a kit with an assortment of bolts.

Have you done this stuff before??

adanp

Havent done it but none of the bolts fit none get snug i wonder if theres a special kit with the exact size off bolts

trilkb

iTrader: (4)

this may be helpful too

adanp

Thx trilkb one more thing do i remove the center bolt

adanp

Srry didnt read the captions

Paul Bell

iTrader: (9)

This is getting better....

Paul Bell

iTrader: (9)

The above shbox photo shows how to remove the damper from the hub. I believe the OP wants the entire affair pulled off the crank.

Paul Bell

iTrader: (9)

adanp, tell us why you want to remove the harmonic damper from your engine.

adanp

Just cuz im tired of looking at the damm thing and its a calling ..voices are telling me too

6898camaross

That **** talks to me too

TwoFast4Lv

iTrader: (8)

AND has no idea how to take one of the three bolt he took out to the store and get longer ones. REALLY????

I THINK you need 2 1/2 to 3 inch long 7/16ths uss bolots but I am not sure. I bought mine 15 years ago and they sit with the puller

Paul Bell

iTrader: (9)

And we have a winner!