Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

N20 + 4.10s = Loss of Traction?

Thread Tools
 
Search this Thread
 
Old 04-06-2004, 10:08 PM
  #1  
11 Second Club
Thread Starter
 
1ScrudeDude's Avatar
 
Join Date: Aug 2003
Location: Boring Green, Kentucky
Posts: 1,538
Likes: 0
Received 0 Likes on 0 Posts

Default N20 + 4.10s = Loss of Traction?

I am likely going with a TNT F1 wet kit within the next several months, but wanted to know if I will have traction issues with the 4.10+Nittos (M6).

How do you guys like it? My car hits hard now with just Heads/Cam and the 4.10 rear, I can't imagine how it will stay down with a 150 shot on it.

Any advice? Go to 3.73's?

Thanks.

Last edited by 1ScrudeDude; 04-06-2004 at 10:35 PM.
Old 04-06-2004, 10:13 PM
  #2  
Shorty Director
iTrader: (1)
 
VINCE's Avatar
 
Join Date: Nov 2001
Location: Valrico, Florida
Posts: 8,260
Received 4 Likes on 3 Posts

Default

You will SPIN LIKE CRAZY. I had that setup for a very short time. No traction means you lose. I have 3.73's now. The more you spray the more gear you want to drop down too. With 4.10's you really do not need to spray a 150 shot. You could get away with a 100 shot easily.
Old 04-06-2004, 10:38 PM
  #3  
11 Second Club
Thread Starter
 
1ScrudeDude's Avatar
 
Join Date: Aug 2003
Location: Boring Green, Kentucky
Posts: 1,538
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by VINCE
You will SPIN LIKE CRAZY. I had that setup for a very short time. No traction means you lose. I have 3.73's now. The more you spray the more gear you want to drop down too. With 4.10's you really do not need to spray a 150 shot. You could get away with a 100 shot easily.
Thanks Vince, I thought so. Well, the good news is that I get to beat the **** out of these 4.10s and squeeze out some hard NA passes before taking a ride on the wild side with N20 and 3.73's
Old 04-06-2004, 11:04 PM
  #4  
On The Tree
 
ITSovr4U's Avatar
 
Join Date: Jan 2004
Location: albany, new york
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1ScrudeDude
I am likely going with a TNT F1 wet kit within the next several months, but wanted to know if I will have traction issues with the 4.10+Nittos (M6).

How do you guys like it? My car hits hard now with just Heads/Cam and the 4.10 rear, I can't imagine how it will stay down with a 150 shot on it.

Any advice? Go to 3.73's?

Thanks.
if you are talking about drag racing, change to et streets. If you are talking about street racing thats another story. I dont know anything about that
Old 04-06-2004, 11:08 PM
  #5  
Teching In
 
mikey94_95's Avatar
 
Join Date: Feb 2004
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

You may want to delay the spray until second gear. I sent you a PM!
Old 04-07-2004, 01:03 AM
  #6  
Staging Lane
 
Adam 2kSS's Avatar
 
Join Date: Aug 2003
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts

Default

consider et drags instead of et streets. i used et streets last year and couldnt hook up w/ 4.30's and a 100 dry.




All times are GMT -5. The time now is 07:44 AM.