LSjim
09-20-2012, 01:17 AM
hi i have a clean california corvette. It is a 1985 c4 with only 82k orignal miles. It has the stock tpi with the doug nash 4+3 and it has a Dana 44. It is a targa top car but needs new interior. The exterior is decent for an 85 and it is the dark bronze color. It passed smog two weeks ago. whats included with it
LS SWAP PARTS
2005 LQ4 with orginal 30k and fbody oilpan is already on there also fbody coil packs, a starter, oil dip stick. This motor was in my camaro and it made great oil pressure stayed at 60 during idle.
VetteAid motor mounts - which uses stock c4 motor mounts to the lsx never been used
ALL autometer gauges- It comes with the bezzle from vette aid it has the 2 5'inch gauges and the 4 2 1/16ths they are all phantom gauges and they are brand new never been powered up i still have the bill from summit.
A built th350 - It has a manual valve body and is good for 1000rwhp with a deral cooler pan, b&m trans cooler with electric fan, and a b&m ratcheting shifter and a custom tripple disk 3200 stall converter. lokar dip stick and tci flex plate and i am including a 700r4 tailshaft from a corvette so it can be mated to the c-beam
Kenny bell supercharger- I am also including my kenny bell kit that was used on my c5. It is a 2.8h kit the kit is complete also includes 107tb nick williams besieds the harmonic balancer fuel rails, and injectors.
All the parts listed are well worth the asking price but feel free to shoot offers. 12000 obo
LS SWAP PARTS
2005 LQ4 with orginal 30k and fbody oilpan is already on there also fbody coil packs, a starter, oil dip stick. This motor was in my camaro and it made great oil pressure stayed at 60 during idle.
VetteAid motor mounts - which uses stock c4 motor mounts to the lsx never been used
ALL autometer gauges- It comes with the bezzle from vette aid it has the 2 5'inch gauges and the 4 2 1/16ths they are all phantom gauges and they are brand new never been powered up i still have the bill from summit.
A built th350 - It has a manual valve body and is good for 1000rwhp with a deral cooler pan, b&m trans cooler with electric fan, and a b&m ratcheting shifter and a custom tripple disk 3200 stall converter. lokar dip stick and tci flex plate and i am including a 700r4 tailshaft from a corvette so it can be mated to the c-beam
Kenny bell supercharger- I am also including my kenny bell kit that was used on my c5. It is a 2.8h kit the kit is complete also includes 107tb nick williams besieds the harmonic balancer fuel rails, and injectors.
All the parts listed are well worth the asking price but feel free to shoot offers. 12000 obo