11_silverado_noob

iTrader: (5)

I am doing a cam swap and I bought a custom ground cam, the cam card that came with it says 226/229 @050 .575/.578 112lsa lift and to run 7.450 pushrods.

However, I took the cam to my machine shop and they used Cam Analyzer. They say it's a 228/230 .530/.530 112lsa

The results are in the picture attached. Can someone please tell me whether I need to use 7.400 or 7.450? I have bought both and really wanted to get my motor back together today

The heads are ported and polished 241s with dual springs and 2.02 valves

Grr

iTrader: (2)

wow that is a weird cam
HUGE .006 #'s 307/310 (bigger than my 238/246 cam)
228/230 112-2
Lift is .564/.562 with a 1.7 rocker, not the .530 you posted
I dunno, what combo was it spec'd for? that is just a ton of overlap

Sales@Tick

iTrader: (3)

Whoever ground that cam dropped the ball big time.

They ground in 2 degrees of retard which is seriously affecting the IVC event and EVO event. That cam is all kinds of *** backwards.

11_silverado_noob

iTrader: (5)

ok, its weird cam, and I am not sure I will like it ...but can someone please say which pushrods I should use? This is my first rodeo and I am at a stand still..

Grr

iTrader: (2)

dont know what the base circle is, but I would use 7.400 and check your preload, i bet its close enough to correct.

11_silverado_noob

iTrader: (5)

Thanks sir!