LS 408 part out
09-21-2012, 08:51 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
LS 408 part out Category: Accessories
Price: $1
Location (State): NV
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
I would rather not part out the bottom end because it really is meant to be together but will part out for the right price.
LS2 block bored out to 4.03
Wiseco 6448RX3 pistons which put the compression for the motor at about 13.8:1 with .040 head gaskets
Wiseco 6125 h beam connecting rods with arp bolts
4340 Balanced crank shaft with the stoke being 4.00
ARP Mainstuds
ls7 windage tray
I will sell just the pistons rods crank and block with good bearings for 2500
Cloyes hex double timing chain 9-3159A 100
Heads, Again I believe it is good to keep all of this together but will sell apart, most parts I have a part number for so you can look them up and then the price
LS2 243 cast heads deck and ported out to flow 345cfm. Yes that is a real flow benched number. 800 bare
Ferra Stainless steel intake valves 2.02inch F6266 100
Ferra Stainless steel exhaust valves 1.6 inch F6233 100
Comp cam 8956 solid lifters 380
Manley nextek springs 221446sf with titanium retainers 900
Comp Cam custom made Cam with .670 lift i have the Cam profile card if you are interested 250
T and D Shaft mount rockers part number 1500, 700
The push rods from manton only work with everything together so I will throw those in and alot more if you want to buy the whole head setup
LS6 intake manifold 200
LS1 ported throttlebody 100
all items are obo
email is the best way to get ahold of me
Guildjs@gmail.com
Trending Topics
02-20-2013, 10:47 PM
#13
TECH Apprentice
iTrader: (2)
Join Date: Aug 2008
Location: Irvine, CA
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if you're still looking to sell the long block. I sent you an e-mail about it. If not, I am going to most likely be picking up another block instead.
-Don
-Don
03-07-2013, 09:49 PM
#17
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
buyers keep falling threw. Sorry for not responded to anyone on here thought i had everything sold.
bottem end will be sold as one.
please email me i do not check my messages on here
guildjs@gmail.com
bottem end will be sold as one.
please email me i do not check my messages on here
guildjs@gmail.com
03-08-2013, 02:31 PM
#18
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
How many more people are going to email me asking how much for the bottom end? 7 so far today. Please email me with an offer my response is always going to e how much the bottom end is listed for. Also email me and stop pming me. Thank you.
