HELP!! lower control arm bushings dont fit
10-06-2012, 08:28 PM
#1
Teching In
Thread Starter
Join Date: Mar 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
HELP!! lower control arm bushings dont fit So heres the deal, i was in the process of rebuilding the front end of my 93 trans am. i bought all the parts and tore into the project, BUT WHEN I GOT TO REPLACING THE LOWER CONTROL ARM BUSHINGS, THE ONES I BOUGHT (K6490) DONT FIT. what should i do!! has anyone else had this problem? What part do i need?
10-06-2012, 09:03 PM
#3
Teching In
Thread Starter
Join Date: Mar 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
the bushing is actually to small for the hole, the bushing that goes horizontal is fine, but the vertical one looks to be about 1/4 inch to small
Last edited by Nic Meshefski; 10-06-2012 at 10:16 PM.
