Nitrous Oxide - bad idea to spray a 111 LSA? or does it matter really?
06-19-2002, 10:53 AM
again the question is up top. but i was wondering if spraying a 111 LSA cam would build too much cylinder pressure or is that BS? since i only plan on spraying a 100 shot with my cam and header car i figured i would ask the smart guys! the cam i am thinking about is single pattern 230 as well.
06-19-2002, 11:07 AM
Sean Freese sprayed a 100+100 and i believe a 150+150 on a 110 LSA.
i wouldnt worry about cam spec too much at this level. Now, at 300-400hp levels (of spray), it may make a difference
06-28-2002, 08:21 PM
111 LOBE IS FINE FOR N20
06-30-2002, 10:29 PM
unless your spraying over a 200 shot then I wouldnt even worry about it.
07-01-2002, 12:55 AM
I called COMPCams, because I had the exact same question. Two of their Techs said 112 LSA will work up to 200 HP Shot, 114 is nessecary for anything over 200 HP Shot.
So by this I conclude that 111 LSA is good up to a 150 shot or so.
I hope this helps, Good Luck <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO