Exhaust Evac system??
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Oct 2007
Location: Danbury Texas
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Evac system??
I am considering installing a old school exhaust evac system to pull the crankcase vapors out. I would tie it in downstream of O2 sensors. Has anyone had any experience with this? What are the pros/cons?
#6
TECH Addict
iTrader: (8)
Mine doesnt smoke at all. What harm could come of it???? Just make sure its after your O2 sensors.
I made a good catch can half full of stainless kitchen scrubbers and each valve cover runs to the bottom of it w/ 1/2" hose, the exhaust pulls from the top of it though 3/4" hose and welded to the exhaust i used the factory air pump check valve. Its not like a vacuum cleaner but before i added it my oil would get milky looking (running E85) with it the oil looks brand new months after I changed it... so im guessing it works great.
I made a good catch can half full of stainless kitchen scrubbers and each valve cover runs to the bottom of it w/ 1/2" hose, the exhaust pulls from the top of it though 3/4" hose and welded to the exhaust i used the factory air pump check valve. Its not like a vacuum cleaner but before i added it my oil would get milky looking (running E85) with it the oil looks brand new months after I changed it... so im guessing it works great.