Lawhead

iTrader: (14)

Well seeing as my job security is in check for at least 6 years I'd start up a thread over here for the build........What the PLAN is going to be is a MS3 Cam only 5.3 with 243 heads and a Vic Jr/ 750 carb think I found the car the power plant will be put in and closing in on getting the car. Not 100% on what tranny I'ma put behind it but thinking TH400/TH350 I'm going to try to follow the guy on Tech who did the swap with the same parts running 10.XX's and try to follow that as much as possible

I'm still not 100% on the cam the MS3 seems to be the "CC306" of the LS1 that it works but is an out dated cam that loves the gas but Input, Hate, Suggestions are welcome.

What I have so far is the
5.3 out of a 2008 Tahoe
With 243 heads 130k miles and link to the car

So still open on the Cam/Intake choice as of now and going to keep the heads as is minus replacing the valve springs such

http://tampa.craigslist.org/pnl/cto/3321191116.html