fivepointseven

iTrader: (19)

Heres my camaro, stock daily driver:


Heres my old TA (cut springs) trying to get back to that look with slightly better ride quality:


Would i be happy with bmr springs with 1.25 drop??

thanks for any input

HCI2000SS

iTrader: (2)

I'm in the same boat as you man lol I'm gonna do either BMR's or Stranos...both a 1.25" drop

1QWKT/A

iTrader: (2)

From the pictures I have seen I do not believe either the Strano or the BMR springs will get you as low as your Trans Am was. You WILL however, have a better ride quality. There was a recent thread where a guy had Strano Springs but also BMR 1" drop A-Arms in the front. Looked perfect IMO and may get the front of your car somewhere close to the one pictured. Do a quick search and you'll find the thread.

1QWKT/A

iTrader: (2)

https://ls1tech.com/forums/suspensio...onis-pics.html

There ya go.

therealcreeper

iTrader: (37)

if you must go that low search jasonWW upper mount mod

SuperSport01

Strano or BMR springs + BMR 1" lower front control arms + the rear hose mod will get you to that height. Koni shocks and JasonWW upper mount will make it ride nice.

BMR Tech2

iTrader: (5)

Hey there. Here are some pictures of a couple Trans Ams with our springs. Without being too biased, I honestly think that 1.25-inches is the sweet spot for these cars. I think the best looking Camaro stance EVER is the STi Killer from GM High Tech, but his stance isn't for everyone as he uses our springs, 1-inch lower A-arms (w/bumpstop kit), and the rear hose mod.

No hose mod.


With the hose mod.


- Kevin