Vengeance built 415 cubic inch F1A ProCharged '12 Camaro SS!!
#1
Vengeance built 415 cubic inch F1A ProCharged '12 Camaro SS!!
This 2012 Camaro SS lived a short life of only 4 miles before it was stripped of its "factory provided" power and driveline! The owner called us after purchasing this car and had it delivered to our shop for a complete VENGEANCE makeover!! I'll let the details and pictures below do all the talking for this INCREDIBLE 5th gen!
ENGINE:
VR 415 cubic inch stroker
Callies Compstar Crankshaft
Callies Compstar Connecting Rods
Diamond Custom Pistons
VR Custom Camshaft
Katech C5R Timing Chain
VR Dual Spring Kit w/ Ti Retainers
Comp Trunion Kit
Melling HV Oil Pump
VR Custom Valve Covers
ATI Damper
VR 415 cubic inch stroker
Callies Compstar Crankshaft
Callies Compstar Connecting Rods
Diamond Custom Pistons
VR Custom Camshaft
Katech C5R Timing Chain
VR Dual Spring Kit w/ Ti Retainers
Comp Trunion Kit
Melling HV Oil Pump
VR Custom Valve Covers
ATI Damper
FUEL SYSTEM:
VR Custom Spec Fuel Sytem
LPE Twin In Tank Pumps
VR Billet Fuel Rail Kit
Flow Matched/Balanced/Tested Injectors to 80lb/hr
VR Custom Spec Fuel Sytem
LPE Twin In Tank Pumps
VR Billet Fuel Rail Kit
Flow Matched/Balanced/Tested Injectors to 80lb/hr
DRIVETRAIN:
RPS Street Twin Carbon Full Clutch Kit
Drive Shaft Shop 9" Rear Conversion Kit
RPS Street Twin Carbon Full Clutch Kit
Drive Shaft Shop 9" Rear Conversion Kit
SUPERCHARGER SYSTEM:
ProCharger F1A Race Kit
12 Rib Upgrade
Air to Air Intercooler
Snow Performance Stage III Meth Injection System
ProCharger F1A Race Kit
12 Rib Upgrade
Air to Air Intercooler
Snow Performance Stage III Meth Injection System
EXHAUST:
ARH 1 7/8" Long Tube Headers w/ Non-Catted Xpipe
ARH Catback Exhaust
ARH 1 7/8" Long Tube Headers w/ Non-Catted Xpipe
ARH Catback Exhaust
SUSPENSION:
Pfadt Race Engineering Lowering Springs
Pfadt Race Engineering Lowering Springs
EXTERIOR:
VFN COPO Bolt On Hood
Weld RTS Wheels 17x10 Rear / 17x5 Front
Mickey Thompson Drag Radial Tires
VFN COPO Bolt On Hood
Weld RTS Wheels 17x10 Rear / 17x5 Front
Mickey Thompson Drag Radial Tires
At the customers request, there are no Dyno Graphs to be shown yet! I believe he has a few grudge races that need to be settled first
VIDEOS:
Still in the factory plastic! Here's a couple pics after the new COPO hood was installed!
GOING INTO SURGERY!!
Here's a few of the finished product!
A race car feel with all the luxury of a new car's interior!
The NEW Heart Beat of this Camaro SS!
Last edited by David@Vengeance; 11-05-2012 at 04:23 PM. Reason: VIDEOS ADDED!
#2
Staging Lane
iTrader: (11)
Join Date: Dec 2010
Location: Indiana
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Very nice build and the car looks great lowered with the drag setup. Nicely done. Sorry if i missed it but what heads are on it? Will any numbers/graphs be posted in the future? Im curious as to what it made since im planning a build very similar for my t/a.
Trending Topics
#8
FormerVendor
iTrader: (51)
Thanx for the good words guys... To answer a few questions..
Stock LS3 cylinder heads with dual spring kit
We will be posting the dyno #s once the customer has settled his "grudge"... He has asked us to keep quiet until that happens.. That being said, an F1A on 15lbs has NO problems getting it done
Stock LS3 cylinder heads with dual spring kit
We will be posting the dyno #s once the customer has settled his "grudge"... He has asked us to keep quiet until that happens.. That being said, an F1A on 15lbs has NO problems getting it done