Bolt-on 200 shot LS1 action!! 1320video
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Bolt-on 200 shot LS1 action!! 1320video
Went out for a photoshoot last saturday, afterwards we decided to do some hoodrat ****, just having fun before tearing the car down to build over winter.
1998 Z28-
Pretty much full bolt-ons but still has LS1 intake, 3.42 gears, torque arm, Vigilante 3800 converter, 200 wet shot on a delay, Untuned... 232,000 original miles on engine and trans...
Couldnt get the bottle pressure over 800psi, with the converter and no tune it tends to hit the limiter before it shifts, and i was spinning to the top of 2nd when the kit came on, even with the 28x11.50x16 ET streets on the CCW's
Oh and the 10R did spray a 40 shot both runs.
Car has done a best of 7.01 @ 101 1/8th with a 1.61 60' on a 150 shot with a half second of delay. car has seen 10+ bottles on a 150 and 1 full bottle of the 200. Just keeps coming back for more, has a sufficient fuel system and BR7ef's, havent saw any sign of detonation yet.
This is from last saturday- http://youtu.be/6NKMipa6Mfw
This is from a while back on the 150 hit. http://youtu.be/wPmpr3VIFZo
props to Kyle @ 1320video for the footage!
1998 Z28-
Pretty much full bolt-ons but still has LS1 intake, 3.42 gears, torque arm, Vigilante 3800 converter, 200 wet shot on a delay, Untuned... 232,000 original miles on engine and trans...
Couldnt get the bottle pressure over 800psi, with the converter and no tune it tends to hit the limiter before it shifts, and i was spinning to the top of 2nd when the kit came on, even with the 28x11.50x16 ET streets on the CCW's
Oh and the 10R did spray a 40 shot both runs.
Car has done a best of 7.01 @ 101 1/8th with a 1.61 60' on a 150 shot with a half second of delay. car has seen 10+ bottles on a 150 and 1 full bottle of the 200. Just keeps coming back for more, has a sufficient fuel system and BR7ef's, havent saw any sign of detonation yet.
This is from last saturday- http://youtu.be/6NKMipa6Mfw
This is from a while back on the 150 hit. http://youtu.be/wPmpr3VIFZo
props to Kyle @ 1320video for the footage!
Last edited by Hotroddin; 11-13-2012 at 10:18 AM.
#3
Launching!
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
It would really benefit from a tune, but i didnt see it necessary since the actualy build is happening over winter.
I am however surprised as to how many cam cars ive taken out, even on motor...
I am however surprised as to how many cam cars ive taken out, even on motor...
#7
Launching!
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Lol, i dont know what it makes, its UNTUNED.
As for Chase, its rather obvious he took off on me without notice, so i hit it after he was a car up, had to wait for the half second delay on the kit to hit, proceed to walk up on him, bounce off the limiter a couple times before it'd shift, then pull out a nose before he shut down. From a dig, or an EVEN started roll of any speed, I'd put a bus on him easy.
of course he is only on 25PSI right now, but IDGAF
As for Chase, its rather obvious he took off on me without notice, so i hit it after he was a car up, had to wait for the half second delay on the kit to hit, proceed to walk up on him, bounce off the limiter a couple times before it'd shift, then pull out a nose before he shut down. From a dig, or an EVEN started roll of any speed, I'd put a bus on him easy.
of course he is only on 25PSI right now, but IDGAF