best cam for a 383 LS1 build?
#1
Teching In
Thread Starter
Join Date: Apr 2011
Location: Fort Hood, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
best cam for a 383 LS1 build?
Gotta rebuild the bottom end of the engine anyways so i'm undertaking a stroked 383 LS1 build in my 98 WS6 A4, got my kit from TSP to include an Eagle forged crankshaft, Eagle 6.125" H-Beam connecting rods with ARP 8740 bolts, Wiseco 3.903" -3cc Flat-top pistons, and clevite bearings.
Currently I've got long tube headders, some form of catback exhaust that the previous owner put on, stock heads which I'm hoping to try and get ported, a ported stock throttle body, and the stock LS1 intake manifold. I'm planning on picking up an LS6 intake and a new cam to round out this build for the time being, but am unsure what cam would be good for this build. Any suggestions would be appreciated
Currently I've got long tube headders, some form of catback exhaust that the previous owner put on, stock heads which I'm hoping to try and get ported, a ported stock throttle body, and the stock LS1 intake manifold. I'm planning on picking up an LS6 intake and a new cam to round out this build for the time being, but am unsure what cam would be good for this build. Any suggestions would be appreciated
Last edited by jsan87; 11-15-2012 at 02:24 PM.
#5
Staging Lane
Join Date: May 2012
Location: Tri-Cities, TN
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
The truth is you can't just pick out a cam if you don't know what you will be running for your cylinder heads. Each cam reacts different to how your heads will flow.