ronnieforrester

iTrader: (3)

4.8
TU1
TH400
TC78
2800lbs
E85



Still have a ways to go but progress is good.









http://s40.photobucket.com/albums/e2...x%20MuffStang/

stangtrader

iTrader: (2)

Looks good,give me ideas for my notch build.
I like the turbo placement, my problem is I want to keep my heater since I live in the north west

green96ta

iTrader: (11)

Makin some progress I see. Wheres the outlet for that hair dryer?

tunedportcj5

iTrader: (18)

Looks good Ronnie. I hope to have the SC back on the street in a few weeks. Where are you getting the E85 from?

-David

ronnieforrester

iTrader: (3)

the guy in lake city lives here in jax and said he would bring drums if you give him notice- other than that ill just drive to macclenny and fill up a 55gal drum or 2 and put in the garage.



you sure Ill need E85 LOL

tunedportcj5

iTrader: (18)

Cool deal... yup, E85 and a little bit of meth will help out. You know... intercoolers are cheap!!! LOL

ronnieforrester

iTrader: (3)

that set up was a joke- then i was like ill try it for real- and then i just bought a ebay 31x12x4 fmic kit

ronnieforrester

iTrader: (3)

RacerXLs1

iTrader: (14)

Looks good. What is it your over all goal. With a the setup?

dudeman

iTrader: (43)

looks good! are you only using that one wastegate?

turbocamaro125

iTrader: (3)

What's the part number on that Griffin rad? Setup looks good btw

ronnieforrester

iTrader: (3)

665Whp and 9.99 @140 but just kinda a fun Sat night street car.


yes , its a 60mm- It should bleed off plenty of pressure when it opens.

8-00165-LS

http://www.summitracing.com/parts/gri-8-00165-ls

ronnieforrester

iTrader: (3)

My craigs list 4.8 had bad bearings


Picked up another 4.8 from a friend who pulled it out of his truck he bought new- It ran well when pulled so Ill keep my fingers crossed.



Wanna play the "what will it make on 15psi" game ?

tunedportcj5

iTrader: (18)

That sucks man. Get some new bearings and have that motor sitting on standby...lol

On a good note, I drove the SC around the block last night. A little wet out but its tuning time!

TDMKR496

iTrader: (3)

Great build! What size is your down pipe?

ronnieforrester

iTrader: (3)

3.5"


Just took it to Pony Wars - It went 10.7 @ 143mph with a crap 2.1 60ft

ronnieforrester

iTrader: (3)

stangtrader

iTrader: (2)

Awesome pics,how well did the 3.5 inch downpipe fit by the firewall? You think a 4inch is possible?

ronnieforrester

iTrader: (3)

The 3.5" is really tight. I don't think a 4" will fit.

I may be switching to 4" outlet turbo so I'm just going to use a reducer pipe for 3-4" off the turbo and merge it with my 3.5" pipe.

stangtrader

iTrader: (2)

Thanks for the info.yours is set up how im thinking of doing mine,but gotta wait and see how the s475 fits in that location.