stewscamaro

iTrader: (2)

Category: Engine - Intake/Fuel
Price: $3500
Part Fits: 93-02 Chevrolet Camaro
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I have an 65,000 mile LS1 out of a 99 Camaro and an M12 T56 out of an 04 GTO at 3,000 miles with a new flywheel and clutch. I was planning on keeping it for a future project. I also have the harness and ECM for the engine, pretty much everything you'd need to make the install. Also included are a set of fbody Pacesetter headers out of a '99 Camaro ($175), a B&M shifter $125), and the aluminum drive shaft from the '99 T56 Camaro ($150), along with the front cradle and suspension shown in the picture, and the stock rear end. I'm looking at a price of $5,000 for everything. PM me if you're interested.

Custom Comp Cam .610/.610 236/238 @.50 113 LSA $300 Shipped

TFS "as cast" LS heads 220 cc, 64 cc combustion chambers (11 to 1 w/ factory head gaskets and 3.905 Mahle pistons), Comp Cams 26926 dual springs, titanium retainers, and hardened locks ($550), professionally hand finished and milled/flow tested ($350). I have $2500 invested, sell for $1600 plus shipping. The heads and have 5K miles, while the cam and springs have 1K miles. It made 460RWHP/408RWTQ on the dyno.

Head Flow Numbers:
Intake@
100 69.4
300 199.6
400 252
500 291.41
600 302.7
650 309.56
700 313.9

Exhaust @
100 45.98
200 138.62
300 149.34
400 181.96
500 194.3
600 221.82

Wildside

iTrader: (21)

Flow numbers a Littel weak

stewscamaro

iTrader: (2)

Thanks for the opinion.. I'm not sure why you would post that, but thanks for showing me spelling and grammar.... anybody that knows anything about heads knows TFS makes some of the best LS heads out there so if you're not interested move on.

ws6_34

Those flow numbers look pretty strong to me since AFR is just over 300 cfm @.600 of lift on the intake as well

Z28GONZO

Where are you located in IL?? And why would you have the car broken down if you just dynoed it last week according to you in Alabama?

stewscamaro

iTrader: (2)

Morton Illinois 61550. I bought these a few months ago from this forum for my project and was copying the original add. I bought these before finding out my rockers and floor were soft and need replaced so no I have the car completely stripped down to the frame and have starting cutting out the panels. I won't need these parts for a year or so and didn't want to have them just sitting around. I also have the ls1 and t56 for iit and have been debating in sling them also for the same reason.

BLWN1

iTrader: (6)

Like to have them

stewscamaro

iTrader: (2)

Make it a Christmas gift to yourself! :-)

lynx853

iTrader: (8)

would you sell just the heads? if so please PM me

dr_whigham

iTrader: (49)

Shoot me a price on this part:

billet fuel rails, AN fittings/lines from intake to factory metal line, fuel pressure gauge

stewscamaro

iTrader: (2)

Looking to sell the intake/throttle body complete. If I find buyers for the rest I'll let ya know.

stewscamaro

iTrader: (2)

LS1 is complete

conde'strans

iTrader: (8)

I'm interested in the following as a combo deal:

Fast 92 intake, Ford 42# green top injectors, billet fuel rails, AN fittings/lines from intake to factory metal line, fuel pressure gauge $1150 Shipped

Fast 92 TB(no sensors) $300 Shipped

These are the last items on my list to finish my 408 serious buyer here with cash in hand give a combo price let me know please. Mine has TFS 225's

conde'strans

iTrader: (8)

pm replied

lilicedout24

iTrader: (33)

Pm me price also if he doesn't take it I will thanks

stewscamaro

iTrader: (2)

All PM's responded to! Thanks for the interest everyone.

stewscamaro

iTrader: (2)

PM's responded

ws6_34

Ill take the intake and throttle body off your hands. I need one very badly

stewscamaro

iTrader: (2)

All PM's responded to.. Please let me know if I missed anyone.

stewscamaro

iTrader: (2)

Wheels & tires are sold!