Stock 4.8 & t76 What cam???
12-10-2012, 09:38 AM
#1
On The Tree
Thread Starter
Join Date: Dec 2011
Location: La.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Stock 4.8 & t76 What cam??? I have a 2000 Silverado and im putting a 4.8 in it with a T76 with a .81 AR I need to know what cam. I have been told by friends to get a 01-02 Z06 - LS6 Cam and run the LS6 springs as well... I do not have the converter already so Dur is Open.. I have to change the carrier in the rear to a locker as well so gear is an option to .. I was going to run a 3.42 ... Trans is going to be a Built 4l60e.. We have a guy that is getting 700-800 RWHP on his in cars heavier than 3800#.. This will be a daily driver and im looking for around 600-650 at the tires.. This is a project that i picked up ...
12-10-2012, 01:56 PM
#7
On The Tree
Thread Starter
Join Date: Dec 2011
Location: La.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I have 862 casting heads... IDK anything about them...
Oh!! I have to keep the 3bolt im using a rear cam sensor..
Oh!! I have to keep the 3bolt im using a rear cam sensor.. Last edited by TURBO10; 12-10-2012 at 01:59 PM. Reason: Adding info
Trending Topics
12-10-2012, 04:11 PM
#9
On The Tree
Thread Starter
Join Date: Dec 2011
Location: La.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
12-11-2012, 12:58 AM
#14
On The Tree
Thread Starter
Join Date: Dec 2011
Location: La.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Its a CXracing T76 w/ .81 ar .. Its the same turbo that was used on the Big Bang Theory in the HotRod Article .. Only looking at around 17-20 psi AtoA intercooler.. Pass side log with a Truck mani on the D/S
