need help to make my part list
#1
need help to make my part list
Hi !
my firts post
i preparing a parts list to drop a ls egine in a g body
for 90 % steet application
i will go with a ls 6.0 liter 2007 lq4
with stock head and piston for now
i will go with bigger head and came later
the turbo will be a gt4718R ball bearing
the .96 a/r on T6 exhaust housing.... it's too small ?
the stock fuel line dia. 3/8 pss and 5/16 returning it will do the job ?
stock LS fuel rail will be ok ?
i alredy have a dual intank walbro 255 second pump
turn on 10 psi to late ? to soon ?
i will go with a 4" single shot exhaust... is a
hooker aero chamber will do the job ?
can i ridding it without ls9 head gasket and stud with
that turbo under 15 psi ?
thanks for help and excuse my english
claude
my firts post
i preparing a parts list to drop a ls egine in a g body
for 90 % steet application
i will go with a ls 6.0 liter 2007 lq4
with stock head and piston for now
i will go with bigger head and came later
the turbo will be a gt4718R ball bearing
the .96 a/r on T6 exhaust housing.... it's too small ?
the stock fuel line dia. 3/8 pss and 5/16 returning it will do the job ?
stock LS fuel rail will be ok ?
i alredy have a dual intank walbro 255 second pump
turn on 10 psi to late ? to soon ?
i will go with a 4" single shot exhaust... is a
hooker aero chamber will do the job ?
can i ridding it without ls9 head gasket and stud with
that turbo under 15 psi ?
thanks for help and excuse my english
claude
#3
Why no chambered muffler? I am new to FI building as well. I have most of my plans laid out already but I have not heard about this in my research. I'm going to procharge though and I am currently running the GMMG chambered cat-back.