I need some pistons.
#1
I need some pistons.
I bought a block from Craigslist with a spun rod bearing and had a local (reputable) machine shop turn the crank, bore it 10 over and new cam bearings. Not sure if I'm going to use the factory rods. I haven't searched any threads about it yet but, either way I need a set of 10 over pistons.
Its for a street car looking to make around 450 and bullet proof. Ill continue to do some research but any suggestions would be great. Looking for best bang for my buck.
Its for a street car looking to make around 450 and bullet proof. Ill continue to do some research but any suggestions would be great. Looking for best bang for my buck.
#5
looks like Speedpro is the piston. Have your machine shop call for a pricing.
My final bore was 3.907 and 5/10ths. I'm surprised there are not more aftermarket pistons readily available for a .010 cut.
My final bore was 3.907 and 5/10ths. I'm surprised there are not more aftermarket pistons readily available for a .010 cut.