06 Twin Turbo Corvette 6MT Z51 3LT E85
#1
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
06 Twin Turbo Corvette 6MT Z51 3LT E85
Year: 2006
Make: Chevrolet
Model: Corvette
Price: $42000
Mileage: 47000
Private or Dealer Listing: Private Listing
Location (State): SC
Color: Red
Transmission: Manual
Drivetrain: Rear Wheel Drive
Car put down 640hp/707tq at 10.5 psi of boost
Currently it runs on 12psi (Low boost) and 16psi (high boost)
Still on the stock LS2 bottom end with the necessary parts to keep it together. This car is built for everything, whether you want to auto-x or drag race, or be the next street king(as long as you're not in TX, lol)!
Some basic info and history on the car
Purchased February 2008 as second owner, car was 100% stock and only had one owner at 21k miles.
This vette is Victory Red with the 3LT package. It has every option, including Nav and dual roofs.
I started off modding with a Kooks full exhaust, Vararam Intake and Fast 92 manifold, it made 406/406 tuned.
That gave me the itch, purchased a used A&A Si kit and ECS Blower cam. Car made 580whp/540tq
I then installed House of Boost Eliminator Fuel system, Arp Head studs and LS9 Head gaskets, then switched pulleys to a 3.25 to 14psi and started to run E85. Car was never put on a dyno, I put many hours into street tuning it!!
Then I took it to the next level, Purchased and installed an UPP twin turbo kit took it to the track, ran a 10.66 @ 136, then blew the trans and diff on the next pass, after a new built trans a diff, im done dumping money into this car and that's how the car sits now with 47k miles
Here is a list of the Aftermarket Parts installed and cost:
UPP twin turbo kit = 5500$
Pat G Spec Turbo cam – 226/226 117lsa = 450$
Pac 1518 Springs = 180$
Katech C5R timing chain = 150$
Comp Hi-Tech Pushrods 120$
ARP Head studs = 250$
LS9 Head Gaskets = 100$
RKT Performance TR6060 Trans = 4000$
RKT Z06 Diff with DSS hardened axles = 3000$
New Shifter Box = 150$
DSS Carbon Fiber Shaft = 1300$
RPS Street Twin Carbon clutch = 1800$
New Slave Cylinder = 200$
Tick Master Cylinder w/full line and remote bleed= 400$
House of Boost fuel system Eliminator Kit = 2300$
ID1000 injectors = 960$
PFadt Engine mounts = 250$
PFadt Trans mount = 290$
PFadt featherlite coilovers = 2190$
PFadt F/R Sway bars = 1250$
PFadt Spherical Bearings = 1890$
RSD 6pt rollbar = 1550$
RSD Line loc = 250$
18x11 widened wheels = 800$
Rear Nitto 555r Tires, (New) = 650$
Z06 Modded Mufflers = 600$
AEM UEGO Wideband gauge = 200$
AEM Tru-Boost controller = 300$
Total 31,080 parts mod.
Not a penny of labor!
KBB Private party values:
30,077 Excellent condition
$29,477 Very Good
Some people use the general rule when trying to sell a modified car is 75% of the parts value and no labor. That would make this car
31,080 * 75% = 23,310
29,466$
+23,310$
52,776$
I understand, that no one is going to spend 52.7k for this car!
so how about 50% of parts cost?
31,080 * 50% = 15,540
29,466$
+15,540$
45,006$ TOTAL
and you know what?!? I'm going to take another 6 dollars off, because I love yall here at the forum!
Any lower than that and I will just return this car to stock, YES, I still own every stock peice I have taken off this car, but I'm 100% sure I can sell everything for ATLEAST 50% of the price I paid originally.
Getting ready to wash it and take some pictures to post tomorrow.
Please let me know if you have any question!! PM me
I've already discovered parts that havne't been added up, so this price may change slightly.
Bumpped it down to 42,000!
Also, just finished a 93 octane tune, so buyer can run whatever fuel they want.
You can reach me direct by emailing username @ gmail.com
Thanks!
-Carl
#6
Teching In
Join Date: Nov 2004
Location: Summerville, SC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Free bump for Carl! Gotta free up some space for the TDi!
Or, you know, you could let me borrow it, put a for sale sign in it, rolling advertisement
Good luck, buddy
Or, you know, you could let me borrow it, put a for sale sign in it, rolling advertisement
Good luck, buddy
#7
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Nothing special but a new best.
682HP/739TQ.
It's going to need external waste-gates with stronger springs to make bigger dyno numbers. On the street it makes 14psi all the way, on this run it hits 14# but falls to 11.
AFR good, lil fat at peak tq, but that's ok, ZERO KNOCK, 16-14 degrees timing. and still plenty of Injector Duty Cycle left to turn it up more!
-Carl
682HP/739TQ.
It's going to need external waste-gates with stronger springs to make bigger dyno numbers. On the street it makes 14psi all the way, on this run it hits 14# but falls to 11.
AFR good, lil fat at peak tq, but that's ok, ZERO KNOCK, 16-14 degrees timing. and still plenty of Injector Duty Cycle left to turn it up more!
-Carl
#11
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
bump, still sitting in the garage. who wants a 10 second twin turbo corvette that's done right!? Drive it to work, drive it to the drag, drive it to the road course, drive it home.
-Carl
-Carl
#13
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
TTT! probley add a flex fuel sensor if new owner wants to run 93 or e85 or any combo inbetween.
-Carl
-Carl
Last edited by carlrx7; 05-24-2013 at 06:31 PM.
#16
Staging Lane
Thread Starter
Join Date: Aug 2008
Location: Charleston, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
On eBay! http://cgi.ebay.com/ebaymotors/2006-C6-Corvette-Twin-Turbo-Victory-Red-6MT-Z51-3LT-E85-682WHP-739WTQ-/181175544880?pt=US_Cars_Trucks&hash=item2a2ee76c30
And here is a link to a bunch of photos I took today!
https://www.dropbox.com/sh/18oeuvprvjuemrh/fooEmv1ceX
And here is a link to a bunch of photos I took today!
https://www.dropbox.com/sh/18oeuvprvjuemrh/fooEmv1ceX