o-ring issue?
#1
TECH Apprentice
Thread Starter
Join Date: Aug 2010
Location: Mexico
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
o-ring issue?
hi, my current block got an o-ring work on deck surface, o-ring to cylinder distance is .060", i'm about to bore it, currently bore 4.155, wanted bore 4.195" so o-ring will finish with .040" distance to cylinder, would that be an issue? is there a safe number for this?
any input would be thanked.
any input would be thanked.