englundjd

As stated im looking for a picture of a dual exhaust picture that I found a while ago but cant seem to find it again.

it was a setup that came off the headers and bent around like it would with a y pipe, I cant remember if there was an x pipe in the system or not but the exhaust pipes ran side by side to the rear axle and then into 2 cutouts, from there it went into a y pipe as it went over the axle and then into a normal muffler... I cant remember if it was on an lsx or ltx car. I would like to find the image as I have been thinking about duplicating it.... it was a very nice system
any help is appreciated

guppymech

iTrader: (7)

Check out this LT1 picture library, Tons of pics.
http://www.lt1engines.com/pictures/

englundjd

unfortunately its not in there ... although there are some in there that are similar up to the axle, thanks for the link!

FormulaJoe

iTrader: (5)

Wrd has this extremely bad *** system. He made it himself and sounds like what your talking about. 2.5" piping. I'd say it is the best true dual over the axle system I've seen on LT1s.

Here's the link...
https://ls1tech.com/forums/lt1-lt4-m...cs-inside.html

englundjd

This is the system I was looking for thank you!

1961ba427

iTrader: (26)

Actually, I think the one you referred to in your original post is different than Wrd's that was linked. You said it was duals back to cutouts and then a Y as it went over the axle into a normal crossflow muffler.
I know exactly which exhaust you are talking about since I saved those pics myself. It is on a black Trans Am LS1 car. Unfortunately my laptop crashed, but I think I have them backed up somewhere.
I love Wrd's "project bass *** true duals" Formula Joe linked, but this other set up looks to be alot easier and cheaper to duplicate.