LSx Tv article on the Honey Badger
#4
10 Second Club
iTrader: (16)
Join Date: May 2009
Location: Miami, FL
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Congrats!
Also- thanks for sharing your slip, I was hoping to see the increments since I have a similar setup and have felt I've been leaving a lot on the table down the track. I think that situation is now resolved -
Also- thanks for sharing your slip, I was hoping to see the increments since I have a similar setup and have felt I've been leaving a lot on the table down the track. I think that situation is now resolved -
#5
10 Second Club
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Hattiesburg, MS
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
No problem man. I've still go to work this 60' down. Went 1.38 recently on a radial on 175 shot leaving on 50 and bringing the other 125 in over 1 second. Hopefully here soon can get in the 1.3x range, leaving on the whole 200, and run it out the back door on spray.
#6
No problem man. I've still go to work this 60' down. Went 1.38 recently on a radial on 175 shot leaving on 50 and bringing the other 125 in over 1 second. Hopefully here soon can get in the 1.3x range, leaving on the whole 200, and run it out the back door on spray.
Hey Im thinking about getting into a Rossler 4L60 . My car makes lil north of 700 to the tire on bottle through 6 speed.. Have you had any problems with yours yet at your power level? I have been told the 60's are junk I need to go with an 80 and be done with it.. I dont wanna spend the coin with an 80 and I know they rob lots of power... My car weighs as much as yours aswell...
Trending Topics
#8
10 Second Club
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: Hattiesburg, MS
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Hey Im thinking about getting into a Rossler 4L60 . My car makes lil north of 700 to the tire on bottle through 6 speed.. Have you had any problems with yours yet at your power level? I have been told the 60's are junk I need to go with an 80 and be done with it.. I dont wanna spend the coin with an 80 and I know they rob lots of power... My car weighs as much as yours aswell...
#10
12 Second Club
iTrader: (5)
Join Date: May 2009
Location: pooler, ga
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
i read that article the other day, very impressive. there is guys here with 400+ cubed stroker motors on spray only running 10.6's so you are doing something right. just goes to show you it dont take a crazy over the top build to go fast. congrats.