94z28shane

I installed headers last night and now I cant get fire, I broke a oil sending unit off and idk if its causing it not to start or not does anyone know what kind of wire I could have knicked or cut in two...or any other suggestion I also didnt connect the smog controll to the header

RamAir95TA

iTrader: (2)

Check your plug wires. You probably have a few switched around.

94z28shane

Would that cause it to just crank and crank and crank

F0x Slaughter

With just installing headers?

Did you break off the coolant sensor?
I did this when I did my headers.

SS RRR

iTrader: (2)

If your headers are the only component you changed out and you are not getting spark then plugs or plug wires could be the problem. You did make sure all wires to the coil and ICM are plugged in?

bufmatmuslepants

iTrader: (3)

Easiest way to check for spark is ground a plug electrode on something metal and look for the spark. I agree with check all your plug wires.