Steve1969LS1

iTrader: (1)

Year: 2010
Make: Chevrolet
Model: Camaro
Price: $48000
Mileage: 14904
Private or Dealer Listing: Private Listing
Location (State): TN
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive

Since I built this car I'm helping the owner sell it.

For sale is a 2010 Camaro RS/SS with a "few" mods. For several years it was a project car for Camaro Performers magazine and just about every part on the car was upgraded.

My estimate is that there's well over $80,000 in parts on the car, Not counting the cost of the car which was around $37,000.. which sounds crazy, but it sure adds up.

The engine is a forged 416-inch LS3 stroker with an $8000 Magnuson blower. We dropped the compression, added a eight-rib pulley system and put 660 hp to the rear tires on pump gas. Behind it is a $1500 Centerforce DYAD clutch. Tuning was done by Mike Norris of Norris Motorsports in Indianapolis.

The exhuast is a set of JBA long tubes into high-flow cats and out through thier stainless exhaust system.

The brakes are a $7000 Baer kit, the rear is a $6,900 9-inch from The Drive Shaft Shop. It has a $7000 Peddars coil-over suspension kit. The fuel system is a $1400 upgrade CTSV style kit from ADM Performance. There's a BMR chassis brace and some trailing and toe rods. After it left the magazine the owner custom modified the BMR strut tower brace to clear the blower and modified the various cover to fit.

For looks there's a set of Dakota Digital LED tail lights. On the body we went with a Seibon CF hood and trunk lid with an Anvil Auto rear spoiler. We also added the Seibon CF ground effects kit. The custom paint was done by Best Of Show Coach Works. There's also a Heritage grille and custom emblems.

It's fast, it handles like it's on rails, and if sound insanely badass. The odometer has just under 15,000 miles on it. Condition is excellent and the car is currently in Tennesse, but can be transported, or driven, anywhere.

The Camaro comes with TWO sets of tires/wheels - For the street there's a set of 20-inch Boze three-piece forged wheels with 275 front and 315 rear Nitto NTO5 tires. For the track there's a set of blacked out Forgeline three-piece 20-inch wheels with Toyo R888 tires.. that's $10,000 in tires and wheels.

The asking price is $48,000 ... Faster than a ZL1 and one of a kind.

Let me know if you have any questions here or you can email me at stevenrupp@sbcglobal.net

Thanks!

Here are a few of the stories on the car:

Final photo shoot wrap-up:
http://www.camaroperformers.com/feat...let-camaro-ss/

blown 416-stroker build:
http://www.camaroperformers.com/proj...s-project-car/

DYAD twin-disc clutch:
http://www.camaroperformers.com/proj...n-disc-clutch/

Carbon fiber parts:
http://www.camaroperformers.com/proj...s-project-car/

Brakes:
http://www.camaroperformers.com/proj...evy-camaro-ss/

Fuel System upgrade:
http://www.camaroperformers.com/proj...r-fuel-system/

9-inch rear, axles, driveshaft upgrade:
http://www.camaroperformers.com/cama...shaft-upgrade/

Engine dress up:
http://www.camaroperformers.com/cama...s-project-car/



With track wheels:

Steve1969LS1

iTrader: (1)

New price.. $48,000 or best offer..

It's a steal of a deal for someone that wants a BUNCH of mods for pretty much free..

I got some PMs that my email was bouncing back.. yea, I had it listed wrong. Sorry.

It's fixed now: stevenrupp@sbcglobal.net

Thanks!

radialrod

Any trades?

RedHotG8

iTrader: (1)

If a stock used Camaro SS sells for about $30K how do you figure the mods are free? It seems to me the buyer is paying almost $20K for them.....