Don Nguyen

iTrader: (2)

Going to be boring/honing out my block to either 4.020" or 4.030" bore. Trying to look on the CP piston website for what I need and their site isn't very user friendly in the sense that's it's easy to search for what I need for my application.

Stock LS2 everything minus the bore of the block. I want valve reliefs in the pistons, which seems like all of their pistons come with anyways. Does anyone know what part number I need?

thanks.

-Don

Tainted

iTrader: (9)

All of it depends on your setup. Too large of a relief and youre gonna lose compression. Not enough relief and your valves will hit.

Don Nguyen

iTrader: (2)

I don't think you can select valve relief, so that's not as much of an issue as far as figuring out which piston I need from them.

-Don

Tainted

iTrader: (9)

You should be able to, there are all different ones from -10cc - +10cc and beyond and everything inbetween.

Then youve got domed, dished, flat etc

redtan

iTrader: (5)

Might want to get that blocked checked out if you want to take it 0.020 or 0.030 over.

djfury05

iTrader: (30)

Are you building the motor for boost or NA?

Don Nguyen

iTrader: (2)

I am building it for NA.

Tainted

iTrader: (9)

Don, why dont you PM me with your entire build youre planning and I'll try to help you out, or at least get you going in the right direction.

LS1MCSS

iTrader: (18)

CP doesn't have anything listed on their site, like you need. They do have a low compression piston or some with a larger bore.

KCS

iTrader: (20)

Why CP? Why not Wiseco?