Twin_Turbo

iTrader: (9)

Anyone have a good recommendation on an oil pan for a 4.5 stroke? Was hoping I could get away with something off the shelf, if not I'll be forced the run a pan spacer. I have very little froom in the front under the pan to clear a crossmember. Worst case, I'll have to modify my tubular front end.

bww3588

iTrader: (49)

That's a big stroke. I'm assuming you're not using a stock block.

Twin_Turbo

iTrader: (9)

nope, tall deck lsx

Busted Knuckles

I only saw one guy trying to stuff that much stroke in an LSX block - careful of the oil galley, he couldn't get his to fit with any amount of grinding and ended up going with an RHS block.

Stage7

iTrader: (1)

The Dailey and Aviaid dry sump pans (newer billet) clear a 4.5" stroke. You will need to machine down half of your ARP main studs but it will clear w/out a spacer.

Twin_Turbo

iTrader: (9)

LME built the short block for me, apparently they did make it fit

Twin_Turbo

iTrader: (9)

I don't have room for a dry sump pump, I already checked...it's real tight there.

hellbents10

iTrader: (10)

We could build a custom pan for you if need be.

Twin_Turbo

iTrader: (9)

Any ballpark idea on $$$?