Caddie Lifters preload
03-07-2013, 07:48 AM
#1
Teching In
Thread Starter
Join Date: Jan 2013
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Caddie Lifters preload I have seen that there is alot of different recommendations for preload on the forums. I currently have my setup at .1/4- 1/2 turn past 0 lash and i am getting alot of noise after warming up. Should i acheive more preload or is just the nature of the beast and live with it. My setup is a iron 408, with PRC LS3 heads, I have a EPS cam with HUC lobes, and comp trunion upgrade. One more question, how much preload is one full turn past zero lash?
