seperate fuel system
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Feb 2013
Location: Brunswick, GA
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
seperate fuel system
How many of you are running a seperate fuel system for nitrous? I have a 6.0l that's carbed and was wanting to add a little spray. 125 shot at the most. I will of course use WOT switch, rpm window switch, and fuel pressure switch but was wondering if I actually needed an extra fuel system for this. Trying to keep costs down
#2
TECH Resident
iTrader: (3)
Join Date: Mar 2009
Location: Bonne Terre, MO
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
If your current fuel system will provide enough to feed the motor and nitrous, and u are for sure going to spray no more than 125, my opinion would be to not even mess with it. It's hard to stop once u get the juice in your blood. Lol. 125 becomes 150, and then 200 and so on.
#5
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Feb 2013
Location: Brunswick, GA
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
It's a stock fuel system in a 92 Chevy pickup that had a 350 tbi with a regulator for the carb on the new motor.. motor is not in truck now I just want to find out what all I need before I put it in it. will make around 450hp at the crank. It's not a race truck just a weekend fun driver with the occasional strip run