How come noone can solve this vibration in the fbodys
#1
12 Second Club
Thread Starter
iTrader: (22)
Join Date: Dec 2011
Location: Pittsburgh, PA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
How come noone can solve this vibration in the fbodys
got new spice u joints
balanced lt1 driveshaft
new umi rear lca
new umi adjustable panhard bar
new rear qa1 rear shocks
new mickey thompson drag radials
new tranny mount the 94 style
wheels and tires balanced
the car still vibrates at 70mph right at the console
makes no sense what can it possibly be noone knows
i know theres post but most of my stuff is new
stock tq arm and bushing
balanced lt1 driveshaft
new umi rear lca
new umi adjustable panhard bar
new rear qa1 rear shocks
new mickey thompson drag radials
new tranny mount the 94 style
wheels and tires balanced
the car still vibrates at 70mph right at the console
makes no sense what can it possibly be noone knows
i know theres post but most of my stuff is new
stock tq arm and bushing
#7
TECH Regular
iTrader: (5)
Join Date: Dec 2010
Location: Too close to the cities, MN
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Hm I would have guessed the driveshaft, but looks like you've already got that covered. I've had my firebird cruising at 90-95 mph and it's smooth as butter. I have all rubber mounts and bushings and most have been replaced within the last 5k miles.
Trending Topics
#11
TECH Addict
iTrader: (6)
Join Date: Jul 2007
Location: Ringoes/Flemington, New Jersey
Posts: 2,852
Likes: 0
Received 1 Like
on
1 Post
I have a wicked vibration over 70mph where it feels like the D/S is going to come FLYING out of the car. I have replaced EVERYTHING up to the axles in the rear end. I am swapping rears on friday.
New clutch/flywheel
2 different transmissions
2 balanced different driveshafts with new u-joints
2 sets of straightened balanced tires
new torque arm
new lcas
new panhard
rebuilt rear with all new minus the axles
literally everything has changed, but the axles...
New clutch/flywheel
2 different transmissions
2 balanced different driveshafts with new u-joints
2 sets of straightened balanced tires
new torque arm
new lcas
new panhard
rebuilt rear with all new minus the axles
literally everything has changed, but the axles...
#17
TECH Fanatic
iTrader: (1)
my car has it horrible too, even in 4th gear.
Super smooth and calm up to 75-80 and then it starts to feel unsafe. Pisses me off because I really want to do the Michigan mile but not in the condition that its in.
I have new mounts, wheels, tires, shocks, clutch kit, and wheel bearings.
Super smooth and calm up to 75-80 and then it starts to feel unsafe. Pisses me off because I really want to do the Michigan mile but not in the condition that its in.
I have new mounts, wheels, tires, shocks, clutch kit, and wheel bearings.
#18
TECH Addict
iTrader: (6)
Join Date: Jul 2007
Location: Ringoes/Flemington, New Jersey
Posts: 2,852
Likes: 0
Received 1 Like
on
1 Post
one transmissions was the original one, and the other one was a "rebuilt" one. I had it in my other formula, and I don't remember a wicked high speed vibration in it... so I dont think its the transmission. That was many moons ago though
#19
On The Tree
Join Date: Jul 2011
Location: Sewell, NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
I cant remember is i had that vibration before or after i installed my exhaust. It is really annoying though, a firm punch to the side of the console where the ebrake is solves it temporarily. EDIT reading most of your comments my console does vibrate but it doesnt feel like the car is falling apart like you've been having.