t56 tailshaft speedo housing mod
#1
t56 tailshaft speedo housing mod
I am just letting you guys know what i have experienced from a "true" car guy... I am somewhat ocd in keeping my OG guages for my my 85 Grand Prix LS1 t56 swap. i researched and found that i either replaced my analog guages for electronic versions or i send out my t56 tailshaft housing to get modded for the speedo drive. I chose the latter because i wanted to keep my stock guages. Dan aka alloy... http://www.t56cablespeedometer.com/ is awesome!! He answered all my questions and did it quickly.And compared to what other companies are charging it is a bargain!! I sent him my tailshaft housing after contacting him and it arrived yesterday looking clean, it also came with instructions!! i would recommend him in heartbeat!!
#3
it actually is epoxied in on that side and doesn't go through to the "other" side. I have researched it for a while and his good reviews were good enough for me.. I originally was going to go with this setup but my cheapskate a*# decided it was too much!!
http://speedscenewiring.com/ssw_zen/...speedometer-ls
http://speedscenewiring.com/ssw_zen/...speedometer-ls
#6
Huh, I am surprised that is doesn't go all the way through.
I do a similar modification to add the mechanical out-put but the insert is welded in and goes all the way though.
I do a similar modification to add the mechanical out-put but the insert is welded in and goes all the way though.
#7
Merv it's not, the lighting makes it look like it is..... Chicago pics please just interested lol! Everything i researched was way to much! I reassembled my Trans yesterday and am pleased with Dan's services. I think some options are better then the companies overpriced parts, makes it hard for the normal guy with a family to build something...
Trending Topics
#8
Click on the link in my signature.
There are pictures in my build thread that show the through-hole that was machined.
Not to say that Dan does not do a good job or anything; when I "engineered" the design to add the mechanical gearing, I wanted the aluminum sleeve to be welded to the housing.
There are pictures in my build thread that show the through-hole that was machined.
Not to say that Dan does not do a good job or anything; when I "engineered" the design to add the mechanical gearing, I wanted the aluminum sleeve to be welded to the housing.
#10
yeah i know but i even though my OG guages aren't the best looking i still wanted to keep the original theme. Only guage i have a left is the tach to make work with the LS engine. Chicago TDP do you offer this service? I probably would have contacted you if i ran across it.... But i'm not gonna wish i went this way instead of the other... I did find someone who was willing to help at the right price.with good reviews to boot! i guess i have to see what happens, i'm confident on my decision..
#11
I do housings on the side...I was going to be a vendor on here but I only do a housing month at best...really only about 10 a year.
I think I should have done what others have and solicited more but it is more just a hobby and service to others that need help. Not getting rich off of anything car related!
I think I should have done what others have and solicited more but it is more just a hobby and service to others that need help. Not getting rich off of anything car related!