toadzq8

iTrader: (43)

Category: Wheels & Tires
Price: $550
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I have a set of Factory GM 2000 SS 10 spokes that the rears have been widened by weldcraft in Michigan to 10.5" wide, A hub centric spacer was machined and welded using a jig to the inside of the rear wheels to correct back spacing. I had these on my 2000 SS and required no modifications to bump stops or wheel wells to fit, the wheels where bead blasted and completely powder coated with a silver grey finish, they where run approx 3500 mikes before I went to 18's perfect condition, will be shipped in separate boxes designed for shipping wheels, figure about 25.00 each insured, if less I will refund. comes with matching center caps, 16 factory lugs and 4 factory locking lugs with key, also the grey lug covers, you will need longer studs for the rear wheels. these were smooth as glass at 150MPH balanced out perfecty.

1949gmc

iTrader: (5)

Wow! Very nice! Any pics of them on the car?

toadzq8

iTrader: (43)

Sure

toadzq8

iTrader: (43)

Bumping it up thanks for looking members

toadzq8

iTrader: (43)

Bumping it up

toadzq8

iTrader: (43)

lowered price

1badbirdy

iTrader: (14)

Free bump for a good deal.

Carter01

iTrader: (11)

Man those look excellent!

NoHope

I'm curious, by widening the rear wheels would I have to get a different sized tire on the rear? Did this affect the car's handling positively, negatively, or not at all? I am considering these, they seem to be in excellent condition!

edwardzracing

iTrader: (59)

Would depend on the size of tire you currently have on your wheels. I wouldn't recommend anything more narrow than a 295 for the size of these widened wheels. Others may chime in, but that's definitely my opinion. I can't speak for the original poster, but my guess is that with the widened wheels, it probably added a tiny bit of weight to the rear with more material and the wider tire... and we all know wider tires make for great handling.

By the way... this is a killer deal. I'm stunned that they are still for sale. Probably just goes to show that selling car parts is becoming more and more difficult with the economy how it is. Good luck to the OP on selling. If by some chance you're willing to sell just the rears, let me know.

camarodude87

iTrader: (8)

shipping to 37042?

camarodude87

iTrader: (8)

if these were chrome. oh man. youd have a buyer.

94Z28-MSTGKLR

iTrader: (20)

What are the sizes exactly that the wheel was widened too? I may be interested in trading my TT2's. If you're interested, send me a PM. Thanks.

toadzq8

iTrader: (43)

bumping it up. 1.5" was added to the stock 9" wheel, I had 315/35/17 on them tad bit more weight but the handleing improvement was well worth it, + the 315's look bad ***.

2kblackgtp

iTrader: (12)

If these didn't have spacers welded on I would be all over them. Why did you opt for the spacers rather than doing 1 inch wheel adapters? Would have given a real mean stance pushed that little extra bit out.

dr_whigham

iTrader: (49)

PM'd. I need wheels bad

toadzq8

iTrader: (43)

Was more inprotant to me to have the hub centric to the wheel I track my car and want everything covered, + you can allways add a spacer! to the existing back spacing but would not be able to lower the car without wheel well mods.

87silverbullet

iTrader: (11)

Get behind me dude. I'm closer to him than you are

Pm sent

dr_whigham

iTrader: (49)

Take em. I'm out anyway. Had to have them by Monday to go to work offshore. I have a new plan...

toadzq8

iTrader: (43)

one last try before they go to E-bay